107 strings / 2455 words

Translation Source string Target string
cnp3-ebook/exercises/ipv6 — French
IPv6 Networks
Réseaux IPv6
cnp3-ebook/exercises/ipv6 — English
IPv6 Networks
IPv6 Networks
cnp3-ebook/exercises/ipv6 — English
Basic questions on IPv6 Networks
Basic questions on IPv6 Networks
cnp3-ebook/exercises/ipv6 — English
Before starting to determine the paths that packets will follow in an IPv6 network, it is important to remember how to convert IPv6 addresses in binary numbers.
Before starting to determine the paths that packets will follow in an IPv6 network, it is important to remember how to convert IPv6 addresses in binary numbers.
cnp3-ebook/exercises/ipv6 — English
An IPv6 forwarding table contains a list of IPv6 prefixes with their associated nexthop or outgoing interface. When an IPv6 router receives a packet, it forwards it according to its forwarding table. Note that IPv6 routers forward packets along the *longest match* between the destination address of the packet and the routes in the forwarding table.
An IPv6 forwarding table contains a list of IPv6 prefixes with their associated nexthop or outgoing interface. When an IPv6 router receives a packet, it forwards it according to its forwarding table. Note that IPv6 routers forward packets along the *longest match* between the destination address of the packet and the routes in the forwarding table.
cnp3-ebook/exercises/ipv6 — English
Now that you master the basics, you can determine the paths followed by IPv6 packets in simple networks.
Now that you master the basics, you can determine the paths followed by IPv6 packets in simple networks.
cnp3-ebook/exercises/ipv6 — English
Design questions
Design questions
cnp3-ebook/exercises/ipv6 — English
Consider the network shown in the figure below. In this network, the following addresses are used.
Consider the network shown in the figure below. In this network, the following addresses are used.
cnp3-ebook/exercises/ipv6 — English
host ``A`` : ``2001:db8:1341:1::A`` and its default route points to ``2001:db8:1341:1::1``
host ``A`` : ``2001:db8:1341:1::A`` and its default route points to ``2001:db8:1341:1::1``
cnp3-ebook/exercises/ipv6 — English
host ``B`` : ``2001:db8:1341:4::B`` and its default route points to ``2001:db8:1341:4::4``
host ``B`` : ``2001:db8:1341:4::B`` and its default route points to ``2001:db8:1341:4::4``
cnp3-ebook/exercises/ipv6 — English
The routers have one address inside each network :
The routers have one address inside each network :
cnp3-ebook/exercises/ipv6 — English
router ``R1`` uses address ``2001:db8:1341:1::1`` on its West interface, address ``2001:db8:1341:12::1`` on its East interface and address ``2001:db8:1341:13::1`` on its South interface
router ``R1`` uses address ``2001:db8:1341:1::1`` on its West interface, address ``2001:db8:1341:12::1`` on its East interface and address ``2001:db8:1341:13::1`` on its South interface
cnp3-ebook/exercises/ipv6 — English
router ``R2`` uses address ``2001:db8:1341:12::2`` on its West interface, address ``2001:db8:1341:23::2`` on its South-West interface and address ``2001:db8:1341:24::2`` on its South interface.
router ``R2`` uses address ``2001:db8:1341:12::2`` on its West interface, address ``2001:db8:1341:23::2`` on its South-West interface and address ``2001:db8:1341:24::2`` on its South interface.
cnp3-ebook/exercises/ipv6 — English
router ``R3`` uses address ``2001:db8:1341:34::3`` on its East interface, address ``2001:db8:1341:23::3`` on its North-East interface and address ``2001:db8:1341:13::3`` on its North interface
router ``R3`` uses address ``2001:db8:1341:34::3`` on its East interface, address ``2001:db8:1341:23::3`` on its North-East interface and address ``2001:db8:1341:13::3`` on its North interface
cnp3-ebook/exercises/ipv6 — English
router ``R4`` uses address ``2001:db8:1341:34::4`` on its West interface, address ``2001:db8:1341:24::4`` on its North interface and address ``2001:db8:1341:4::4`` on its East interface
router ``R4`` uses address ``2001:db8:1341:34::4`` on its West interface, address ``2001:db8:1341:24::4`` on its North interface and address ``2001:db8:1341:4::4`` on its East interface
cnp3-ebook/exercises/ipv6 — English
The forwarding paths used in a network depend on the forwarding tables installed in the network nodes. Sometimes, these forwarding tables must be configured manually.
The forwarding paths used in a network depend on the forwarding tables installed in the network nodes. Sometimes, these forwarding tables must be configured manually.
cnp3-ebook/exercises/ipv6 — English
In this network, propose the forwarding tables of ``R2`` and ``R3`` that ensure that hosts ``A`` and ``B`` can exchange packets in both directions.
In this network, propose the forwarding tables of ``R2`` and ``R3`` that ensure that hosts ``A`` and ``B`` can exchange packets in both directions.
cnp3-ebook/exercises/ipv6 — English
Consider the same network as in the previous question, but now the forwarding tables of ``R2`` and ``R3`` are configured as shown below :
Consider the same network as in the previous question, but now the forwarding tables of ``R2`` and ``R3`` are configured as shown below :
cnp3-ebook/exercises/ipv6 — English
In this network, select `all` the rules in the shown forwarding tables that ensure that the packets sent from ``A`` to ``B`` follow the reverse path of the packets sent by ``B`` to ``A``.
In this network, select `all` the rules in the shown forwarding tables that ensure that the packets sent from ``A`` to ``B`` follow the reverse path of the packets sent by ``B`` to ``A``.
cnp3-ebook/exercises/ipv6 — English
router ``R2`` uses address ``2001:db8:1341:12::2`` on its West interface, and address ``2001:db8:1341:24::2`` on its South interface
router ``R2`` uses address ``2001:db8:1341:12::2`` on its West interface, and address ``2001:db8:1341:24::2`` on its South interface
cnp3-ebook/exercises/ipv6 — English
router ``R3`` uses address ``2001:db8:1341:34::3`` on its East interface and address ``2001:db8:1341:13::3`` on its North interface
router ``R3`` uses address ``2001:db8:1341:34::3`` on its East interface and address ``2001:db8:1341:13::3`` on its North interface
cnp3-ebook/exercises/ipv6 — English
Routers ``R2`` and ``R3`` are buggy in this network. Besides the routes for their local interfaces (not shown in the figure), they only have a default route which is shown in the figure below.
Routers ``R2`` and ``R3`` are buggy in this network. Besides the routes for their local interfaces (not shown in the figure), they only have a default route which is shown in the figure below.
cnp3-ebook/exercises/ipv6 — English
How do you configure the forwarding tables on ``R1`` and ``R4`` so that ``A`` can reach ``B`` and the reverse ?
How do you configure the forwarding tables on ``R1`` and ``R4`` so that ``A`` can reach ``B`` and the reverse ?
cnp3-ebook/exercises/ipv6 — English
Consider a slightly different network than in the previous question.
Consider a slightly different network than in the previous question.
cnp3-ebook/exercises/ipv6 — English
Assuming that the following IPv6 addresses are used :
Assuming that the following IPv6 addresses are used :
cnp3-ebook/exercises/ipv6 — English
router ``R1`` uses address ``2001:db8:1341:1::1`` on its West interface, address ``2001:db8:1341:12::1`` on its East interface, address ``2001:db8:1341:14::1`` on its South-East interface and address ``2001:db8:1341:13::1`` on its South interface
router ``R1`` uses address ``2001:db8:1341:1::1`` on its West interface, address ``2001:db8:1341:12::1`` on its East interface, address ``2001:db8:1341:14::1`` on its South-East interface and address ``2001:db8:1341:13::1`` on its South interface
cnp3-ebook/exercises/ipv6 — English
router ``R4`` uses address ``2001:db8:1341:34::4`` on its West interface, address ``2001:db8:1341:24::4`` on its North interface, address ``2001:db8:1341:14::4`` on its North-West interface and address ``2001:db8:1341:4::4`` on its East interface
router ``R4`` uses address ``2001:db8:1341:34::4`` on its West interface, address ``2001:db8:1341:24::4`` on its North interface, address ``2001:db8:1341:14::4`` on its North-West interface and address ``2001:db8:1341:4::4`` on its East interface
cnp3-ebook/exercises/ipv6 — English
Can you configure the forwarding tables so that the following paths are used by packets sent by host ``A`` to reach one of the four addresses of router ``R4``?
Can you configure the forwarding tables so that the following paths are used by packets sent by host ``A`` to reach one of the four addresses of router ``R4``?
cnp3-ebook/exercises/ipv6 — English
Do your forwarding tables impose the path used to reach host ``B`` which is attached to router ``R4`` or do you need to configure an additional entry in these tables ?
Do your forwarding tables impose the path used to reach host ``B`` which is attached to router ``R4`` or do you need to configure an additional entry in these tables ?
cnp3-ebook/exercises/ipv6 — English
Consider the network below that contains only routers. This network has been configured by a group of students and you must verify whether the configuration is correct. All the IPv6 addresses are part of the same ``/48`` prefix that we name ``p``. The following subnets are defined in this ``/48`` prefix.
Consider the network below that contains only routers. This network has been configured by a group of students and you must verify whether the configuration is correct. All the IPv6 addresses are part of the same ``/48`` prefix that we name ``p``. The following subnets are defined in this ``/48`` prefix.
cnp3-ebook/exercises/ipv6 — English
``p:12/64`` for the link between ``R1`` and ``R2``. On this subnet, ``R1`` uses address ``p:12::1`` while router ``R2`` uses address ``p:12::2``
``p:12/64`` for the link between ``R1`` and ``R2``. On this subnet, ``R1`` uses address ``p:12::1`` while router ``R2`` uses address ``p:12::2``
cnp3-ebook/exercises/ipv6 — English
``p:13/64`` for the link between ``R1`` and ``R3``. On this subnet, ``R1`` uses address ``p:13::1`` while router ``R3`` uses address ``p:13::3``
``p:13/64`` for the link between ``R1`` and ``R3``. On this subnet, ``R1`` uses address ``p:13::1`` while router ``R3`` uses address ``p:13::3``
cnp3-ebook/exercises/ipv6 — English
``p:24/64`` for the link between ``R2`` and ``R4``. On this subnet, ``R2`` uses address ``p:24::2`` while router ``R4`` uses address ``p:24::4``
``p:24/64`` for the link between ``R2`` and ``R4``. On this subnet, ``R2`` uses address ``p:24::2`` while router ``R4`` uses address ``p:24::4``
cnp3-ebook/exercises/ipv6 — English
...
...
cnp3-ebook/exercises/ipv6 — English
The students have configured the following forwarding tables on these six routers.
The students have configured the following forwarding tables on these six routers.
cnp3-ebook/exercises/ipv6 — English
on router ``R1``
on router ``R1``
cnp3-ebook/exercises/ipv6 — English
on router ``R2``
on router ``R2``
cnp3-ebook/exercises/ipv6 — English
on router ``R3``
on router ``R3``
cnp3-ebook/exercises/ipv6 — English
on router ``R5``
on router ``R5``
cnp3-ebook/exercises/ipv6 — English
on router ``R4``
on router ``R4``
cnp3-ebook/exercises/ipv6 — English
on router ``R6``
on router ``R6``
cnp3-ebook/exercises/ipv6 — English
What do you think about the proposed configuration?
What do you think about the proposed configuration?
cnp3-ebook/exercises/ipv6 — English
Sometimes, static routes must be configured on networks to enforce certain paths. Consider the six routers network shown in the figure below.
Sometimes, static routes must be configured on networks to enforce certain paths. Consider the six routers network shown in the figure below.
cnp3-ebook/exercises/ipv6 — English
In this network, we will focus on four IPv6 prefixes :
In this network, we will focus on four IPv6 prefixes :
cnp3-ebook/exercises/ipv6 — English
``p:0000::/64`` used on the link ``A1-R1``. ``A1`` uses address ``p:0000::A1/64``
``p:0000::/64`` used on the link ``A1-R1``. ``A1`` uses address ``p:0000::A1/64``
cnp3-ebook/exercises/ipv6 — English
``p:0001::/64`` used on the link ``A2-R3``. ``A2`` uses address ``p:0001::A2/64``
``p:0001::/64`` used on the link ``A2-R3``. ``A2`` uses address ``p:0001::A2/64``
cnp3-ebook/exercises/ipv6 — English
``p:0002::/64`` used on the link ``B1-R5``. ``B1`` uses address ``p:0002::B1/64``
``p:0002::/64`` used on the link ``B1-R5``. ``B1`` uses address ``p:0002::B1/64``
cnp3-ebook/exercises/ipv6 — English
``p:0003::/64`` used on the link ``B2-R6``. ``B2`` uses address ``p:0003::B2/64``
``p:0003::/64`` used on the link ``B2-R6``. ``B2`` uses address ``p:0003::B2/64``
cnp3-ebook/exercises/ipv6 — English
Can you configure the forwarding tables of the six routers to achieve the following network objectives :
Can you configure the forwarding tables of the six routers to achieve the following network objectives :
cnp3-ebook/exercises/ipv6 — English
All packets sent by ``B1`` and ``B2`` to ``A1`` and ``A2`` are always forwarded via ``R2`` while all packets from ``A1`` and ``A2`` are always forwarded via ``R4``
All packets sent by ``B1`` and ``B2`` to ``A1`` and ``A2`` are always forwarded via ``R2`` while all packets from ``A1`` and ``A2`` are always forwarded via ``R4``
cnp3-ebook/exercises/ipv6 — English
The packets whose destinations are ``A1``, ``A2``, ``B1`` or ``B2`` are never forwarded via router ``R4``
The packets whose destinations are ``A1``, ``A2``, ``B1`` or ``B2`` are never forwarded via router ``R4``
cnp3-ebook/exercises/ipv6 — English
The packets sent by ``A1`` or ``A2`` towards ``B1`` are always forwarded via ``R2`` while the packets towards ``B2`` are always forwarded via ``R4``.
The packets sent by ``A1`` or ``A2`` towards ``B1`` are always forwarded via ``R2`` while the packets towards ``B2`` are always forwarded via ``R4``.
cnp3-ebook/exercises/ipv6 — English
When creating these forwarding tables, try to minimize the number of entries that you install on each router.
When creating these forwarding tables, try to minimize the number of entries that you install on each router.
cnp3-ebook/exercises/ipv6 — English
When a network is designed, an important element of the design is the IP address allocation plan. A good allocation plan can provide flexibility and help to reduce the size of the forwarding tables.
When a network is designed, an important element of the design is the IP address allocation plan. A good allocation plan can provide flexibility and help to reduce the size of the forwarding tables.
cnp3-ebook/exercises/ipv6 — English
Assign IP subnets to all links in this network so that you can reduce the number of entries in the forwarding tables of all routers. Assume that you have received a ``/56`` prefix that you can use as you want. Each subnet containing a host must be allocated a ``/64`` subnet.
Assign IP subnets to all links in this network so that you can reduce the number of entries in the forwarding tables of all routers. Assume that you have received a ``/56`` prefix that you can use as you want. Each subnet containing a host must be allocated a ``/64`` subnet.
cnp3-ebook/exercises/ipv6 — English
Configuring IPv6 Networks
Configuring IPv6 Networks
cnp3-ebook/exercises/ipv6 — English
With the previous exercises, you have learned how to reason about IPv6 networks "on paper". Given the availability of IPv6 implementations, it is also possible to carry out experiments in real and virtual labs. Several virtual environments are possible. In this section, we focus on mininet_. mininet_ is an emulation framework developed at Stanford University that leverages the namespaces features of recent Linux kernels. With those namespaces, a single Linux kernel can support a variety of routers and hosts interconnected by virtual links. mininet_ has been used by several universities as an educational tool, but unfortunately it was designed without IPv6 support.
With the previous exercises, you have learned how to reason about IPv6 networks "on paper". Given the availability of IPv6 implementations, it is also possible to carry out experiments in real and virtual labs. Several virtual environments are possible. In this section, we focus on mininet_. mininet_ is an emulation framework developed at Stanford University that leverages the namespaces features of recent Linux kernels. With those namespaces, a single Linux kernel can support a variety of routers and hosts interconnected by virtual links. mininet_ has been used by several universities as an educational tool, but unfortunately it was designed without IPv6 support.
cnp3-ebook/exercises/ipv6 — English
During the last years, `Olivier Tilmans <https://inl.info.ucl.ac.be/otilmans.html>`_ and `Mathieu Jadin <https://inl.info.ucl.ac.be/mjadin.html>`_ have developed the missing piece to enable students to use mininet_ to experiment with IPv6: ipmininet_. ipmininet_ is a python module that provides the classes that are required to automatically configure IPv6 networks with different routing protocols. It is available from PyPi from https://pypi.python.org/ipmininet.
During the last years, `Olivier Tilmans <https://inl.info.ucl.ac.be/otilmans.html>`_ and `Mathieu Jadin <https://inl.info.ucl.ac.be/mjadin.html>`_ have developed the missing piece to enable students to use mininet_ to experiment with IPv6: ipmininet_. ipmininet_ is a python module that provides the classes that are required to automatically configure IPv6 networks with different routing protocols. It is available from PyPi from https://pypi.python.org/ipmininet.
cnp3-ebook/exercises/ipv6 — English
The syntax of IPMininet_ is relatively simple and can be learned by looking at a few examples.
The syntax of IPMininet_ is relatively simple and can be learned by looking at a few examples.
cnp3-ebook/exercises/ipv6 — English
Let us start our exploration of IPv6 routing with a simple network topology that contains two hosts and three routers and uses static routes.
Let us start our exploration of IPv6 routing with a simple network topology that contains two hosts and three routers and uses static routes.
cnp3-ebook/exercises/ipv6 — English
IPMininet_ simplifies the creation of the network topology by providing a simple API. For this, you simply need to declare a class that extends the ``IPTopo`` class.
IPMininet_ simplifies the creation of the network topology by providing a simple API. For this, you simply need to declare a class that extends the ``IPTopo`` class.
cnp3-ebook/exercises/ipv6 — English
Then, you need to extend the build method that creates routers and hosts.
Then, you need to extend the build method that creates routers and hosts.
cnp3-ebook/exercises/ipv6 — English
Although IPMininet_ can assign prefixes and addresses automatically, we use manually assigned addresses in this example.
Although IPMininet_ can assign prefixes and addresses automatically, we use manually assigned addresses in this example.
cnp3-ebook/exercises/ipv6 — English
We use five /64 IPv6 prefixes in this network topology:
We use five /64 IPv6 prefixes in this network topology:
cnp3-ebook/exercises/ipv6 — English
``2001:db8:1341:1::/64`` on the link between ``a`` and ``r1``
``2001:db8:1341:1::/64`` on the link between ``a`` and ``r1``
cnp3-ebook/exercises/ipv6 — English
``2001:db8:1341:12::/64`` on the link between ``r1`` and ``r2``
``2001:db8:1341:12::/64`` on the link between ``r1`` and ``r2``
cnp3-ebook/exercises/ipv6 — English
``2001:db8:1341:13::/64`` on the link between ``r1`` and ``r3``
``2001:db8:1341:13::/64`` on the link between ``r1`` and ``r3``
cnp3-ebook/exercises/ipv6 — English
``2001:db8:1341:23::/64`` on the link between ``r2`` and ``r3``
``2001:db8:1341:23::/64`` on the link between ``r2`` and ``r3``
cnp3-ebook/exercises/ipv6 — English
``2001:db8:1341:1::/64`` on the link between ``b`` and ``r3``
``2001:db8:1341:1::/64`` on the link between ``b`` and ``r3``
cnp3-ebook/exercises/ipv6 — English
We can then manually configure the IPv6 addresses of each host/router on each link. Let us start with the links attached to the two hosts.
We can then manually configure the IPv6 addresses of each host/router on each link. Let us start with the links attached to the two hosts.
cnp3-ebook/exercises/ipv6 — English
The same can be done for the three links between the different routers.
The same can be done for the three links between the different routers.
cnp3-ebook/exercises/ipv6 — English
With these IP prefixes and the network topology, we can now use IPMininet_ to create the topology and assign the addresses.
With these IP prefixes and the network topology, we can now use IPMininet_ to create the topology and assign the addresses.
cnp3-ebook/exercises/ipv6 — English
We start by creating the objects that correspond to the static routes on the three routers. The second argument of the ``addDaemon`` method is a list of ``StaticRoute`` objects. Each of these objects is created by specifying an IP prefix and a nexthop.
We start by creating the objects that correspond to the static routes on the three routers. The second argument of the ``addDaemon`` method is a list of ``StaticRoute`` objects. Each of these objects is created by specifying an IP prefix and a nexthop.
cnp3-ebook/exercises/ipv6 — English
We can now create the hosts and the routers
We can now create the hosts and the routers
cnp3-ebook/exercises/ipv6 — English
With this ``build`` method, we can now launch the network by using the python code below.
With this ``build`` method, we can now launch the network by using the python code below.
cnp3-ebook/exercises/ipv6 — English
The entire script is available from :download:`/exercises/ipmininet_scripts/static-1.py`.
The entire script is available from :download:`/exercises/ipmininet_scripts/static-1.py`.
cnp3-ebook/exercises/ipv6 — English
To help students to start using IPMininet, `Mathieu Jadin <https://inl.info.ucl.ac.be/mjadin.html>`_ has created a Vagrant box that launches a Ubuntu virtual machine with all the required software. See https://ipmininet.readthedocs.io/en/latest/install.html for additional information.
To help students to start using IPMininet, `Mathieu Jadin <https://inl.info.ucl.ac.be/mjadin.html>`_ has created a Vagrant box that launches a Ubuntu virtual machine with all the required software. See https://ipmininet.readthedocs.io/en/latest/install.html for additional information.
cnp3-ebook/exercises/ipv6 — English
Here is a simple example of the utilization of this Vagrant box.
Here is a simple example of the utilization of this Vagrant box.
cnp3-ebook/exercises/ipv6 — English
We start the network topology shown above with the ``sudo python script.py`` command. It launches the mininet_ interactive shell that provides several useful commands:
We start the network topology shown above with the ``sudo python script.py`` command. It launches the mininet_ interactive shell that provides several useful commands:
cnp3-ebook/exercises/ipv6 — English
Some of the standard mininet commands assume the utilisation of IPv4 and do not have a direct IPv6 equivalent. Here are some useful commands.
Some of the standard mininet commands assume the utilisation of IPv4 and do not have a direct IPv6 equivalent. Here are some useful commands.
cnp3-ebook/exercises/ipv6 — English
The ``nodes`` command lists the routers and hosts that have been created in the mininet topology.
The ``nodes`` command lists the routers and hosts that have been created in the mininet topology.
cnp3-ebook/exercises/ipv6 — English
The ``links`` command lists the links that have been instantiated and shows that mapping between the named interfaces on each node.
The ``links`` command lists the links that have been instantiated and shows that mapping between the named interfaces on each node.
cnp3-ebook/exercises/ipv6 — English
It is possible to execute any of the standard Linux commands to configure the network stack on any of the hosts by prefixing the command with the corresponding host. Remember to always specify ``inet6`` as the address family to retrieve the IPv6 information.
It is possible to execute any of the standard Linux commands to configure the network stack on any of the hosts by prefixing the command with the corresponding host. Remember to always specify ``inet6`` as the address family to retrieve the IPv6 information.
cnp3-ebook/exercises/ipv6 — English
Host ``a`` has two interfaces: the standard loopback interface and a network interface named ``a-eth0`` that is attached to router ``r1``. We can also verify how the IPv6 addresses have been configured:
Host ``a`` has two interfaces: the standard loopback interface and a network interface named ``a-eth0`` that is attached to router ``r1``. We can also verify how the IPv6 addresses have been configured:
cnp3-ebook/exercises/ipv6 — English
On its ``a-eth0`` interface, host ``a`` uses IPv6 address ``2001:db8:1341:1::a/64``. The link local address (``fe80::c44e:26ff:fed9:de6d/64``) will be described in another chapter. Finally, we can check the forwarding table of host ``a``.
On its ``a-eth0`` interface, host ``a`` uses IPv6 address ``2001:db8:1341:1::a/64``. The link local address (``fe80::c44e:26ff:fed9:de6d/64``) will be described in another chapter. Finally, we can check the forwarding table of host ``a``.
cnp3-ebook/exercises/ipv6 — English
There are three routes in this table. The first two correspond to the two prefixes that are used over the ``a-eth0`` interface. These routes are automatically created when an IPv6 address is configured on an interface. The last route is the default route (``::/0``) which points towards ``2001:db8:1341:1::1``, i.e. router ``r1``.
There are three routes in this table. The first two correspond to the two prefixes that are used over the ``a-eth0`` interface. These routes are automatically created when an IPv6 address is configured on an interface. The last route is the default route (``::/0``) which points towards ``2001:db8:1341:1::1``, i.e. router ``r1``.
cnp3-ebook/exercises/ipv6 — English
Another useful command is ``xterm`` 'node' that allows to launch a terminal on the specified node. This gives you a interactive shell on any node. You can use it to capture packets with tcpdump_. As an example, let us use :manpage:`traceroute6(8)` to trace the path followed by packets from host ``a`` towards the IPv6 address of host ``b`` i.e. ``2001:db8:1341:3::b``. The output of this command shows that the path passes through routers ``r1``, ``r2`` and ``r3``.
Another useful command is ``xterm`` 'node' that allows to launch a terminal on the specified node. This gives you a interactive shell on any node. You can use it to capture packets with tcpdump_. As an example, let us use :manpage:`traceroute6(8)` to trace the path followed by packets from host ``a`` towards the IPv6 address of host ``b`` i.e. ``2001:db8:1341:3::b``. The output of this command shows that the path passes through routers ``r1``, ``r2`` and ``r3``.
cnp3-ebook/exercises/ipv6 — English
Another interesting mininet_ command is ``pingall`` it allows to check that any host can reach any other host inside the network. It executes a ping from any host to any other host inside the network topology.
Another interesting mininet_ command is ``pingall`` it allows to check that any host can reach any other host inside the network. It executes a ping from any host to any other host inside the network topology.
cnp3-ebook/exercises/ipv6 — English
When debugging a network, it can be interesting to capture packets using tcpdump_ on specific links to check that they follow the expect. If you use tcpdump_ without any filter, you will capture the packets generated by xterm. To capture packets, you need to specify precise filters that will match the packets of interest. For traceroute6, you need to match the IPv6 packets that contain UDP segments and some ICMPv6 packets. The script below provides a simple filter that you can reuse. It takes one argument: the name of the interface on which tcpdump_ needs to run.
When debugging a network, it can be interesting to capture packets using tcpdump_ on specific links to check that they follow the expect. If you use tcpdump_ without any filter, you will capture the packets generated by xterm. To capture packets, you need to specify precise filters that will match the packets of interest. For traceroute6, you need to match the IPv6 packets that contain UDP segments and some ICMPv6 packets. The script below provides a simple filter that you can reuse. It takes one argument: the name of the interface on which tcpdump_ needs to run.
cnp3-ebook/exercises/ipv6 — English
Starting from the :download:`/exercises/ipmininet_scripts/static-1.py` IPMininet_ script, we can explore classical problems when networks are configured with static routes. A first problem is when a router has an incomplete forwarding table. We configure the static routes as shown below. The entire script is available from :download:`/exercises/ipmininet_scripts/static-1-hole.py`.
Starting from the :download:`/exercises/ipmininet_scripts/static-1.py` IPMininet_ script, we can explore classical problems when networks are configured with static routes. A first problem is when a router has an incomplete forwarding table. We configure the static routes as shown below. The entire script is available from :download:`/exercises/ipmininet_scripts/static-1-hole.py`.
cnp3-ebook/exercises/ipv6 — English
We first check with ``pingall`` whether the network works correctly.
We first check with ``pingall`` whether the network works correctly.
cnp3-ebook/exercises/ipv6 — English
The problem can be detected by using :manpage:`traceroute6(8)`.
The problem can be detected by using :manpage:`traceroute6(8)`.
cnp3-ebook/exercises/ipv6 — English
In the output of :manpage:`traceroute6(8)`, a ``!N`` indicates that host ``a`` received from ``2001:db8:1341:12::2``, i.e. router ``r2``, a Network unreachable ICMPv6 message. The forwarding table of ``r2`` confirms the root cause of this problem.
In the output of :manpage:`traceroute6(8)`, a ``!N`` indicates that host ``a`` received from ``2001:db8:1341:12::2``, i.e. router ``r2``, a Network unreachable ICMPv6 message. The forwarding table of ``r2`` confirms the root cause of this problem.
cnp3-ebook/exercises/ipv6 — English
A second problem is when there is a forwarding loop inside the network, i.e. packets sent to a specific destination loop through several routers. With the static routes shown below, router ``r2`` forwards the packets towards ``2001:db8:1341:3::b`` via router ``r1``. The entire script is available from :download:`/exercises/ipmininet_scripts/static-1-loop.py`.
A second problem is when there is a forwarding loop inside the network, i.e. packets sent to a specific destination loop through several routers. With the static routes shown below, router ``r2`` forwards the packets towards ``2001:db8:1341:3::b`` via router ``r1``. The entire script is available from :download:`/exercises/ipmininet_scripts/static-1-loop.py`.
cnp3-ebook/exercises/ipv6 — English
The ``pingall`` command reveals that there is a problem in this network.
The ``pingall`` command reveals that there is a problem in this network.
cnp3-ebook/exercises/ipv6 — English
We can analyze this configuration problem in more details by using ``traceroute6``. The loop appears clearly.
We can analyze this configuration problem in more details by using ``traceroute6``. The loop appears clearly.
cnp3-ebook/exercises/ipv6 — English
On host ``b``, the problem is different. The packets that it sends towards host ``a`` do not seem to go beyond router ``r3``.
On host ``b``, the problem is different. The packets that it sends towards host ``a`` do not seem to go beyond router ``r3``.
cnp3-ebook/exercises/ipv6 — English
To debug this problem, let us look at the forwarding table of ``r3``. This router forwards the packets sent to host ``a`` to router ``r1`` that is directly connected to host ``a``.
To debug this problem, let us look at the forwarding table of ``r3``. This router forwards the packets sent to host ``a`` to router ``r1`` that is directly connected to host ``a``.
cnp3-ebook/exercises/ipv6 — English
Unfortunately, when router ``r1`` sends its ICMP HopLimit exceeded message, the destination of this IP packet is ``2001:db8:1341:3::b``. This packet is forward to router ``r2`` that returns the packet back to router ``r1``. The packet loops between the two routers until their HopLimit reaches zero.
Unfortunately, when router ``r1`` sends its ICMP HopLimit exceeded message, the destination of this IP packet is ``2001:db8:1341:3::b``. This packet is forward to router ``r2`` that returns the packet back to router ``r1``. The packet loops between the two routers until their HopLimit reaches zero.
cnp3-ebook/exercises/ipv6 — English
IPv6 packets
IPv6 packets