cnp3-ebook/exercises/network — Czech @ Weblate: Is it possible to configure the link weights so that …

Zen

Translation

English

Czech

Needs editing

Skip

	English	Czech	Actions
	This is an unpolished draft of the third edition of this e-book. If you find any error or have suggestions to improve the text, please create an issue via https://github.com/CNP3/ebook/issues?milestone=2 or help us by providing pull requests to close the existing issues.
	The network below uses port forwarding with flat addresses. The network boots and all hosts start one after the other. Explain at each step how the packets are forwarded and how the port forwarding tables of the network nodes are modified. Host `C` sends a packet to host `B`. Some time later, host `A` sends a packet to host `C`. Finally, host `B` sends a packet to host `A`.
	Same question as above, but the network is modified as shown in the figure below.
	Routing protocols used in data networks only use positive link weights. What would happen with a distance vector routing protocol in the network below that contains a negative link weight ?
	When a network specialist designs a network, one of the problems that he needs to solve is to set the metrics the links in his network. In the USA, the Abilene network interconnects most of the research labs and universities. The figure below shows the topology of this network in 2009.
	The Abilene network
	In this network, assume that all the link weights are set to 1. What is the paths followed by a packet sent by the router located in `Los Angeles` to reach :
	the router located in `New York`
	the router located in `Washington` ?
	Is it possible to configure the link metrics so that the packets sent by the router located in `Los Angeles` to the routers located in respectively `New York` and `Washington` do not follow the same path ?
	Is it possible to configure the link weights so that the packets sent by the router located in `Los Angeles` to router located in `New York` follow one path while the packets sent by the router located in `New York` to the router located in `Los Angeles` follow a completely different path ?
	Assume that the routers located in `Denver` and `Kansas City` need to exchange lots of packets. Can you configure the link metrics such that the link between these two routers does not carry any packet sent by another router in the network ?
	Consider the network shown in the figure below.
	Assuming that the network uses source routing, what are the possible paths from `R1` to `R4` ?
	The network operator uses would like to have the following paths in this network :
	`R3->R2->R4->R5` and `R1->R2->R5`
	Is it possible to achieve these paths and if so what are the required forwarding tables ?
	Same question with virtual circuits.
	The network operator would like to use the following paths :
	`R1->R2->R4` and `R3->R2->R5->R4`
	`R1->R5->R4` and `R3->R2->R4`
	The network below uses port forwarding tables. It has been running for several hours and all hosts have exchanged packets. What is the content of the port forwarding tables ?

Loading…

None

Source string added

English 0 characters edited

6 years ago

Browse all string changes

Glossary

English	Czech
No related strings found in the glossary.

16777 String information

Source string location

../../exercises/network.rst:101

String age

6 years ago

Last updated

a month ago

Source string age

6 years ago

Translation file

locale/cs/LC_MESSAGES/exercises/network.po, string 13

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the previous translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.