Zen

Translation

Another usage of packetdrill_ is to explore how a TCP connection ends. The scripts below show how a TCP stack closes a TCP connection. The first example shows a local host that connects to a remote host and then closes the connection. The remote host acknowledges the ``FIN`` and later closes its direction of data transfer. This script is available from :download:`/exercises/packetdrill_scripts/local-close.pkt`.
0/4140 · 414

Sign in to save translations.

English French Actions
Each line of a packetdrill_ script starts with a `timing` parameter that indicates at what time the event specified on this line should happen. packetdrill_ supports absolute and relative timings. An absolute timing is simply a number that indicates the delay in seconds between the start of the script and the event. A relative timing is indicated by using ``+`` followed by a number. This number is then the delay in seconds between the previous event and the current line. Additional information may be found in [CCB+2013]_.
 
The description of TCP packets in packetdrill_ uses a syntax that is very close to the tcpdump_ one. The ``+0`` timing indicates that the line is executed immediately after the previous event. The ``<`` sign indicates that packetdrill_ injects a TCP segment and the ``S`` character indicates that the ``SYN`` flag must be set. Like tcpdump_, packetdrill_ uses sequence numbers that are relative to initial sequence number. The three numbers that follow are the sequence number of the first byte of the payload of the segment (``0``), the sequence number of the last byte of the payload of the segment (``0`` after the semi-column) and the length of the payload (``0`` between brackets) of the ``SYN`` segment. This segment does not contain a valid acknowledgment but advertises a window of 1000 bytes. All ``SYN`` segments must also include the ``MSS`` option. In this case, we set the MSS to 1000 bytes. The next line of the packetdrill_ script verifies the reply sent by the instrumented Linux kernel.
 
This TCP segment is sent immediately by the stack. The ``SYN`` flag is set and the dot next to the ``S`` character indicates that the ACK flag is also set. The SYN+ACK segment does not contain any data but its acknowledgment number is set to 1 (relative to the initial sequence number). For outgoing packets, packetdrill_ does not verify the value of the advertised window. In this line, it also accepts any TCP options (``<...>``).
 
The third segment of the three-way handshake is sent by packetdrill_ after a delay of 0.1 seconds. The connection is now established and the accept system call will succeed.
 
The :manpage:`accept` system call returns a new file descriptor, in this case value ``4``. At this point, packetdrill_ can write data on the socket or inject packets.
 
packetdrill_ writes 10 bytes of data through the :manpage:`write` system call. The stack immediately sends these 10 bytes inside a segment whose ``Push`` flag is set [#fpush]_. The payload starts at sequence number ``1`` and ends at sequence number ``10``. packetdrill_ replies by injecting an acknowledgment for the entire data after 100 milliseconds.
 
packetdrill_ can also inject data that will be read by the stack as shown by the lines below.
 
In the example above, packetdrill_ injects a segment containing two bytes. This segment is acknowledged and after that the :manpage:`read` system call succeeds and reads the available data with a buffer of 1000 bytes. It returns the amount of read bytes, i.e. ``2``.
 
We can now close the connection gracefully. Let us first issue inject a segment with the ``FIN`` flag set.
 
packetdrill_ injects the ``FIN`` segment and the instrumented kernel returns an acknowledgment. If packetdrill_ issues the :manpage:`close` system call, the kernel will send a ``FIN`` segment to terminate the connection. packetdrill_ injects an acknowledgment to confirm the end of the connection.
 
The complete packetdrill_ script is available from :download:`/exercises/packetdrill_scripts/connect.pkt`.
 
Another interesting features of packetdrill_ is that it is possible to inspect the state maintained by the Linux kernel for the underlying connection using the ``TCP_INFO`` socket option. This makes it possible to retrieve the value of some variables of the TCP control block.
 
Let us first explore how a TCP connection can be established. In the previous script, we have injected the segments that a client would send to a server. We can also use the Linux stack as a client and inject the segments that a server would return. Such a client process would first create its :manpage:`socket`` and then issue the :manpage:`connect` system call. At this point, the stack sends a ``SYN`` segment. To simplify the scripts, we have configured the stack to use a ``MSS`` of 1000 bytes and disabled the TCP extensions (the details of this configuration may be found at the beginning of the script). The server replies with a ``SYN+ACK`` and the stack sends acknowledges it to finish the three-way-handshake.
 
The ``tcpi_state`` variable used in this script is returned by ``TCP_INFO`` [#ftcpinfo]_. It tracks the state of the TCP connection according to TCP's finite state machine [#fstates]_. This script is available from :download:`/exercises/packetdrill_scripts/client.pkt`.
 
Another example is the simultaneous establishment of a TCP connection. The TCP stack sends a ``SYN`` and receives a ``SYN`` in response instead of a ``SYN+ACK``. It then acknowledges the received ``SYN`` and retransmits its own ``SYN``. The connection becomes established upon reception of the fourth segment. This script is available from :download:`/exercises/packetdrill_scripts/dual.pkt`.
 
Another usage of packetdrill_ is to explore how a TCP connection ends. The scripts below show how a TCP stack closes a TCP connection. The first example shows a local host that connects to a remote host and then closes the connection. The remote host acknowledges the ``FIN`` and later closes its direction of data transfer. This script is available from :download:`/exercises/packetdrill_scripts/local-close.pkt`.
 
As for the establishment of a connection, it is also possible for the two communicating hosts to close the connection at the same time. This is shown in the example below where the remote host sends its own ``FIN`` when acknowledging the first one. This script is available from :download:`/exercises/packetdrill_scripts/local-close2.pkt`.
 
A third scenario for the termination of a TCP connection is that the remote hosts sends its ``FIN`` first. This script is available from :download:`/exercises/packetdrill_scripts/remote-close.pkt`.
 
Another very interesting utilization of packetdrill_ is to explore how a TCP stack reacts to acknowledgments that would correspond to lost or reordered segments. For this analysis, we configure a very large initial congestion window to ensure that the connection does not start with a slow-start.
 
Let us first use packetdrill_ to explore the evolution of the TCP retransmission timeout. The value of this timeout is set based on the measured round-trip-time and its variance. When the retransmission timer expires, TCP doubles the retransmission timer. This exponential backoff mechanism is important to ensure that TCP slowdowns during very severe congestion periods. We use the ``tcpi_rto`` variable from ``TCP_INFO`` to track the evolution of the retransmission timer. This script is available from :download:`/exercises/packetdrill_scripts/rto.pkt`.
 
We can use a similar code to demonstrate that the TCP stack performs a fast retransmit after having received three duplicate acknowledgments. This script is available from :download:`/exercises/packetdrill_scripts/frr.pkt`.
 
A TCP stack uses both the fast retransmit technique and retransmission timers. A retransmission timer can fire after a fast retransmit when several segments are lost. The example below shows a loss of two consecutive segments. This script is available from :download:`/exercises/packetdrill_scripts/frr-rto.pkt`.
 
More complex scenarios can be written. The script below demonstrates how the TCP stack behaves when three segments are lost. This script is available from :download:`/exercises/packetdrill_scripts/frr-rto2.pkt`.
 
The examples above have demonstrated how TCP retransmits lost segments. However, they did not consider the interactions with the congestion control scheme since the use a large initial congestion window. We now set the initial congestion window to two MSS-sized segments and use the ``tcpi_snd_cwnd`` and ``tcpi_snd_ssthresh`` variables from ``TCP_INFO`` to explore the evolution of the TCP congestion control scheme. Our first script looks at the evolution of the congestion window during a slow-start when there are no losses. This script is available from :download:`/exercises/packetdrill_scripts/slow-start.pkt`.
 
Some TCP clients use delayed acknowledgments and send a TCP acknowledgment after after second in-sequence segment. This behavior is illustrated in the script below. This script is available from :download:`/exercises/packetdrill_scripts/slow-start-delayed.pkt`.
 
We can now explore how TCP's retransmission techniques interact with the congestion control scheme. The Linux TCP code that combines these two techniques contains several heuristics to improve their performance. We start with a transfer of 8KBytes where the penultimate segment is not received by the remote host. In this case, TCP does not receive enough acknowledgments to trigger the fast retransmit and it must wait for the expiration of the retransmission timer. This script is available from :download:`/exercises/packetdrill_scripts/slow-start-rto2.pkt`.
 
Another interesting scenario is when the loss happens early in the data transfer. This is shown in the script below where the second segment is lost. We observe that by triggering transmissions of unacknowledged data, the :rfc:`3042` rule speeds up the recovery since a fast retransmit happens. This script is available from :download:`/exercises/packetdrill_scripts/slow-start-frr2.pkt`.
 
Our last scenario is when the first segment sent is lost. In this case, two round-trip-times are required to retransmit the missing segment and recover from the loss. This script is available from :download:`/exercises/packetdrill_scripts/slow-start-frr3.pkt`.
 
Open questions
 
Unless otherwise noted, we assume for the questions in this section that the following conditions hold.
 
the sender/receiver performs a single :manpage:`send(3)` of `x` bytes
 

Loading…

User avatar None

Source string added
Another usage of packetdrill_ is to explore how a TCP connection ends. The scripts below show how a TCP stack closes a TCP connection. The first example shows a local host that connects to a remote host and then closes the connection. The remote host acknowledges the ``FIN`` and later closes its direction of data transfer. This script is available from :download:`/exercises/packetdrill_scripts/local-close.pkt`.
4 years ago
Browse all string changes

Glossary

English French
No related strings found in the glossary.

30614 String information

Source string location
../../exercises/tcp-2.rst:191
String age
4 years ago
Last updated
a month ago
Source string age
4 years ago
Translation file
locale/fr/LC_MESSAGES/exercises/tcp-2.po, string 30