Zen

Translation

To understand the key principles behind the operation of a network, let us analyze all the operations that need to be performed to allow host `A` in the above network to send one byte to host `B`. Thanks to the datalink layer used above the `A-R1` link, host `A` can easily send a byte to router `R1` inside a frame. However, upon reception of this frame, router `R1` needs to understand that this byte is destined to host `B` and not to itself. This is the objective of the network layer.
0/4890 · 489

Sign in to save translations.

English Czech Actions
Building a network
 
This is an unpolished draft of the third edition of this e-book. If you find any error or have suggestions to improve the text, please create an issue via https://github.com/CNP3/ebook/issues?milestone=2 or help us by providing pull requests to close the existing issues.
 
In the previous section, we have explained how reliable protocols allow hosts to exchange data reliably even if the underlying physical layer is imperfect and thus unreliable. Connecting two hosts together through a wire is the first step to build a network. However, this is not sufficient. Hosts usually need to interact with other hosts that are not directly connected through a direct physical layer link. This can be achieved by adding one layer above the datalink layer: the `network` layer.
 
The main objective of the network layer is to allow hosts, connected to different networks, to exchange information through intermediate systems called :term:`router`. The unit of information in the network layer is called a :term:`packet`.
 
Before explaining the operation of the network layer, it is useful to remember the characteristics of the service provided by the `datalink` layer. There are many variants of the datalink layer. Some provide a reliable service while others do not provide any guarantee of delivery. The reliable datalink layer services are popular in environments such as wireless networks where transmission errors are frequent. On the other hand, unreliable services are usually used when the physical layer provides an almost reliable service (i.e. only a negligible fraction of the frames are affected by transmission errors). Such `almost reliable` services are frequently used in wired and optical networks. In this chapter, we will assume that the datalink layer service provides an `almost reliable` service since this is both the most general one and also the most widely deployed one.
 
There are two main types of datalink layers. The simplest datalink layer is when there are only two communicating systems that are directly connected through the physical layer. Such a datalink layer is used when there is a point-to-point link between the two communicating systems. These two systems can be hosts or routers. PPP (Point-to-Point Protocol), defined in :rfc:`1661`, is an example of such a point-to-point datalink layer. Datalink layer entities exchange `frames`. A datalink :term:`frame` sent by a datalink layer entity on the left is transmitted through the physical layer, so that it can reach the datalink layer entity on the right. Point-to-point datalink layers can either provide an unreliable service (frames can be corrupted or lost) or a reliable service (in this case, the datalink layer includes retransmission mechanisms).
 
The second type of datalink layer is the one used in Local Area Networks (LAN). Conceptually, a LAN is a set of communicating devices such that any two devices can directly exchange frames through the datalink layer. Both hosts and routers can be connected to a LAN. Some LANs only connect a few devices, but there are LANs that can connect hundreds or even thousands of devices. In this chapter, we focus on the utilization of point-to-point datalink layers. We describe later the organization and the operation of Local Area Networks and their impact on the network layer.
 
As a first step, let us assume that we only need to exchange a small amount of data. In this case, there is no issue with the maximum length of the frames. However, there are other more interesting problems that we need to tackle. To understand these problems, let us consider the network represented in the figure below.
 
This network contains two types of devices. The hosts, represented with circles and the routers, represented as boxes. A host is a device which is able to send and receive data for its own usage in contrast with routers that most of the time simply forward data towards their final destination. Routers have multiple links to neighboring routers or hosts. Hosts are usually attached via a single link to the network. Nowadays, with the growth of wireless networks, more and more hosts are equipped with several physical interfaces. These hosts are often called `multihomed`. Still, using several interfaces at the same time often leads to practical issues that are beyond the scope of this document. For this reason, we only consider `single-homed` hosts in this e-book.
 
To understand the key principles behind the operation of a network, let us analyze all the operations that need to be performed to allow host `A` in the above network to send one byte to host `B`. Thanks to the datalink layer used above the `A-R1` link, host `A` can easily send a byte to router `R1` inside a frame. However, upon reception of this frame, router `R1` needs to understand that this byte is destined to host `B` and not to itself. This is the objective of the network layer.
 
To send one byte of information to host `B`, host `A` needs to place this information inside a `packet`. In addition to the data being transmitted, the packet also contains either the addresses of the source and the destination nodes or information that indicates the path that needs to be followed to reach the destination.
 
There are two possible organizations for the network layer :
 
`datagram`
 
`virtual circuits`
 
The datagram organization
 
The first and most popular organization of the network layer is the datagram organization. This organization is inspired by the organization of the postal service. Each host is identified by a `network layer address`. To send information to a remote host, a host creates a packet that contains:
 
the network layer address of the destination host
 
its own network layer address
 
the information to be sent
 
To understand the datagram organization, let us consider the figure below. A network layer address, represented by a letter, has been assigned to each host and router. To send some information to host `J`, host `A` creates a packet containing its own address, the destination address and the information to be exchanged.
 
With the datagram organization, routers use `hop-by-hop forwarding`. This means that when a router receives a packet that is not destined to itself, it looks up the destination address of the packet in its `forwarding table`. A `forwarding table` is a data structure that maps each destination address (or set of destination addresses) to the outgoing interface over which a packet destined to this address must be forwarded to reach its final destination. The router consults its forwarding table to forward each packet that it handles.
 
The figure illustrates some possible forwarding tables in this network. By inspecting the forwarding tables of the different routers, one can find the path followed by packets sent from a source to a particular destination. In the example above, host `A` sends its packet to router `R1`. `R1` consults its forwarding table and forwards the packet towards `R2`. Based on its own table, `R2` decides to forward the packet to `R5` that can deliver it to its destination. Thus, the path from `A` to `J` is `A -> R1 -> R2 -> R5 -> J`.
 

Loading…

User avatar None

Source string added
To understand the key principles behind the operation of a network, let us analyze all the operations that need to be performed to allow host `A` in the above network to send one byte to host `B`. Thanks to the datalink layer used above the `A-R1` link, host `A` can easily send a byte to router `R1` inside a frame. However, upon reception of this frame, router `R1` needs to understand that this byte is destined to host `B` and not to itself. This is the objective of the network layer.
6 years ago
Browse all string changes

Glossary

English Czech
No related strings found in the glossary.

17466 String information

Source string location
../../principles/network.rst:68
String age
6 years ago
Last updated
a month ago
Source string age
6 years ago
Translation file
locale/cs/LC_MESSAGES/principles/network.po, string 12