Source string Source string

762/10000 · 762
English Actions
network layer entities exchange *packets*
transport layer entities exchange *segments*
application layer entities exchange *SDUs*
Reference models
Two reference models have been successful in the networking community : the OSI reference model and the TCP/IP reference model. We discuss them briefly in this section.
The TCP/IP reference model
In contrast with OSI, the TCP/IP community did not spend a lot of effort defining a detailed reference model; in fact, the goals of the Internet architecture were only documented after TCP/IP had been deployed [Clark88]_. :rfc:`1122`, which defines the requirements for Internet hosts, mentions four different layers. Starting from the top, these are :
the Application layer
the Transport layer
the Internet layer which is equivalent to the network layer of our reference model
the Link layer which combines the functions of the physical and datalink layers of our five-layer reference model
Besides this difference in the lower layers, the TCP/IP reference model is very close to the five layers that we use throughout this document.
The OSI reference model
Compared to the five layers reference model explained above, the :term:`OSI` reference model defined in [X200]_ is divided in seven layers. The four lower layers are similar to the four lower layers described above. The OSI reference model refined the application layer by dividing it in three layers :
the `Session layer`. The Session layer contains the protocols and mechanisms that are necessary to organize and to synchronize the dialogue and to manage the data exchange of presentation layer entities. While one of the main functions of the transport layer is to cope with the unreliability of the network layer, the session's layer objective is to hide the possible failures of transport-level connections to the upper layer higher. For this, the Session Layer provides services that allow establishing a session-connection, to support in-order data exchange (including mechanisms that allow recovering from the abrupt release of an underlying transport connection), and to release the connection in an orderly manner.
the `Presentation layer` was designed to cope with the different ways of representing information on computers. There are many differences in the way computer store information. Some computers store integers as 32 bits field, others use 64 bits field and the same problem arises with floating point number. For textual information, this is even more complex with the many different character codes that have been used [#funicode]_. The situation is even more complex when considering the exchange of structured information such as database records. To solve this problem, the Presentation layer provides a common representation of the data transferred. The :term:`ASN.1` notation was designed for the Presentation layer and is still used today by some protocols.
the `Application layer` that contains the mechanisms that do not fit in neither the Presentation nor the Session layer. The OSI Application layer was itself further divided in several generic service elements.
Footnotes
An interesting historical discussion of the OSI-TCP/IP debate may be found in [Russel06]_
There is now a rough consensus for the greater use of the Unicode_ character format. Unicode can represent more than 100,000 different characters from the known written languages on Earth. Maybe one day, all computers will only use Unicode to represent all their stored characters and Unicode could become the standard format to exchange characters, but we are not yet at this stage today.

Loading…

User avatar None

String updated in the repository

cnp3-ebook / principles/referencemodels — English

the `Presentation layer` was designed to cope with the different ways of representing information on computers. There are many differences in the way computer store information. Some computers store integers as 32 bits field, others use 64 bits field and the same problem arises with floating point number. For textual information, this is even more complex with the many different character codes that have been used [#funicode]_. The situation is even more complex when considering the exchange of structured information such as database records. To solve this problem, the Presentation layer provides a common representation of the data transferred. The :term:`ASN.1` notation was designed for the Presentation layer and is still used today by some protocols.
the `Presentation layer` was designed to cope with the different ways of representing information on computers. There are many differences in the way computer store information. Some computers store integers as 32 bits field, others use 64 bits field and the same problem arises with floating point number. For textual information, this is even more complex with the many different character codes that have been used [#funicode]_. The situation is even more complex when considering the exchange of structured information such as database records. To solve this problem, the Presentation layer provides a common representation of the data transferred. The :term:`ASN.1` notation was designed for the Presentation layer and is still used today by some protocols.
2 years ago
Browse all component changes

Glossary

English English
No related strings found in the glossary.

String information

Flags
read-only
Source string location
../../principles/referencemodels.rst:238
String age
2 years ago
Source string age
2 years ago
Translation file
locale/pot/principles/referencemodels.pot, string 40