Translation

English
010
0/100 · 3
English Czech Actions
This parity scheme has been used in some RAMs as well as to encode characters sent over a serial line. It is easy to show that this coding scheme allows the receiver to detect a single transmission error, but it cannot correct it. However, if two or more bits are in error, the receiver may not always be able to detect the error.
Some coding schemes allow the receiver to correct some transmission errors. For example, consider the coding scheme that encodes each source bit as follows :
`1` is encoded as `111`
`0` is encoded as `000`
For example, consider a sender that sends `111`. If there is one bit in error, the receiver could receive `011` or `101` or `110`. In these three cases, the receiver will decode the received bit pattern as a `1` since it contains a majority of bits set to `1`. If there are two bits in error, the receiver will not be able anymore to recover from the transmission error.
To understand `error detection codes`, let us consider two devices that exchange bit strings containing `N` bits. To allow the receiver to detect a transmission error, the sender converts each string of `N` bits into a string of `N+r` bits. Usually, the `r` redundant bits are added at the beginning or the end of the transmitted bit string, but some techniques interleave redundant bits with the original bits. An `error detection code` can be defined as a function that computes the `r` redundant bits corresponding to each string of `N` bits. The simplest error detection code is the parity bit. There are two types of parity schemes : even and odd parity. With the `even` (resp. `odd`) parity scheme, the redundant bit is chosen so that an even (resp. odd) number of bits are set to `1` in the transmitted bit string of `N+r` bits. The receiver can easily recompute the parity of each received bit string and discard the strings with an invalid parity. The parity scheme is often used when 7-bit characters are exchanged. In this case, the eighth bit is often a parity bit. The table below shows the parity bits that are computed for bit strings containing three bits.
3 bits string
Odd parity
Even parity
000
1
0
001
010
100
111
110
101
011
The parity bit allows a receiver to detect transmission errors that have affected a single bit among the transmitted `N+r` bits. If there are two or more bits in error, the receiver may not necessarily be able to detect the transmission error. More powerful error detection schemes have been defined. The Cyclical Redundancy Checks (CRC) are widely used in datalink layer protocols. An N-bits CRC can detect all transmission errors affecting a burst of less than N bits in the transmitted frame and all transmission errors that affect an odd number of bits. Additional details about CRCs may be found in [Williams1993]_.
It is also possible to design a code that allows the receiver to correct transmission errors. The simplest `error correction code` is the triple modular redundancy (TMR). To transmit a bit set to `1` (resp. `0`), the sender transmits `111` (resp. `000`). When there are no transmission errors, the receiver can decode `111` as `1`. If transmission errors have affected a single bit, the receiver performs majority voting as shown in the table below. This scheme allows the receiver to correct all transmission errors that affect a single bit.
Received bits
Decoded bit
Other more powerful error correction codes have been proposed and are used in some applications. The `Hamming Code <https://en.wikipedia.org/wiki/Hamming_code>`_ is a clever combination of parity bits that provides error detection and correction capabilities.
Reliable protocols use error detection schemes, but none of the widely used reliable protocols rely on error correction schemes. To detect errors, a frame is usually divided into two parts :
a `header` that contains the fields used by the reliable protocol to ensure reliable delivery. The header contains a checksum or Cyclical Redundancy Check (CRC) [Williams1993]_ that is used to detect transmission errors
a `payload` that contains the user data
Some headers also include a `length` field, which indicates the total length of the frame or the length of the payload.
The simplest error detection scheme is the checksum. A checksum is basically an arithmetic sum of all the bytes that a frame is composed of. There are different types of checksums. For example, an eight bit checksum can be computed as the arithmetic sum of all the bytes of (both the header and trailer of) the frame. The checksum is computed by the sender before sending the frame and the receiver verifies the checksum upon frame reception. The receiver discards frames received with an invalid checksum. Checksums can be easily implemented in software, but their error detection capabilities are limited. Cyclical Redundancy Checks (CRC) have better error detection capabilities [SGP98]_, but require more CPU when implemented in software.

Loading…

User avatar None

New source string

cnp3-ebook / principles/reliability — Czech

New source string 5 years ago
Browse all component changes

Glossary

English Czech
No related strings found in the glossary.

String information

Source string location
../../principles/reliability.rst:433 • ../../principles/reliability.rst:450
String age
5 years ago
Source string age
5 years ago
Translation file
locale/cs/LC_MESSAGES/principles/reliability.po, string 133