Source string Source string

829/10000 · 829
English Actions
The transport layer entity interacts with both a user in the application layer and the network layer. It improves the network layer service to make it usable by applications. From the application's viewpoint, the main limitations of the network layer service come from its unreliable service:
the network layer may corrupt data;
the network layer may loose data;
the network layer may not deliver data in-order;
the network layer has an upper bound on maximum length of the data;
the network layer may duplicate data.
To deal with these issues, the transport layer includes several mechanisms that depend on the service that it provides. It interacts with both the applications and the underlying network layer.
Interactions between the transport layer, its user, and its network layer provider
We have already described in the datalink layers mechanisms to deal with data losses and transmission errors. These techniques are also used in the transport layer.
Connectionless transport
The simplest service that can be provided in the transport layer is the connectionless transport service. Compared to the connectionless network layer service, this transport service includes two additional features :
an `error detection` mechanism that allows detecting corrupted data
a `multiplexing technique` that enables several applications running on one host to exchange information with another host
To exchange data, the transport protocol encapsulates the SDU produced by its user inside a `segment`. The `segment` is the unit of transfer of information in the transport layer. Transport layer entities always exchange segments. When a transport layer entity creates a segment, this segment is encapsulated by the network layer into a packet which contains the segment as its payload and a network header. The packet is then encapsulated in a frame to be transmitted in the datalink layer.
A `segment` also contains control information, usually stored inside a `header` and the payload that comes from the application. To detect transmission errors, transport protocols rely on checksums or CRCs like the datalink layer protocols.
Compared to the connectionless network layer service, the transport layer service allows several applications running on a host to exchange SDUs with several other applications running on remote hosts. Let us consider two hosts, e.g. a client and a server. The network layer service allows the client to send information to the server, but if an application running on the client wants to contact a particular application running on the server, then an additional addressing mechanism is required. The network layer address identifies a host, but it is not sufficient to differentiate the applications running on a host. `Port numbers` provides this additional addressing. When a server application is launched on a host, it registers a `port number`. This `port number` will be used by the clients to contact the server process.
The figure below shows a typical usage of port numbers. The client process uses port number `1234` while the server process uses port number `5678`. When the client sends a request, it is identified as originating from port number `1234` on the client host and destined to port number `5678` on the server host. When the server process replies to this request, the server's transport layer returns the reply as originating from port `5678` on the server host and destined to port `1234` on the client host.
To support the connection-oriented service, the transport layer needs to include several mechanisms to enrich the connectionless network-layer service. We discuss these mechanisms in the following sections.
Connection establishment
Like the connectionless service, the connection-oriented service allows several applications running on a given host to exchange data with other hosts. The port numbers described above for the connectionless service are also used by the connection-oriented service to multiplex several applications. Similarly, connection-oriented protocols use checksums/CRCs to detect transmission errors and discard segments containing an invalid checksum/CRC.
An important difference between the connectionless service and the connection-oriented one is that the transport entities in the latter maintain some state during lifetime of the connection. This state is created when a connection is established and is removed when it is released.
The simplest approach to establish a transport connection would be to define two special control segments : `CR` (Connection Request) and `CA` (Connection Acknowledgment). The `CR` segment is sent by the transport entity that wishes to initiate a connection. If the remote entity wishes to accept the connection, it replies by sending a `CA` segment. The `CR` and `CA` segments contain `port numbers` that allow identifying the communicating applications. The transport connection is considered to be established once the `CA` segment has been received. At that point, data segments can be sent in both directions.
Unfortunately, this scheme is not sufficient given the unreliable network layer. Since the network layer is imperfect, the `CR` or `CA` segments can be lost, delayed, or suffer from transmission errors. To deal with these problems, the control segments must be protected by a CRC or a checksum to detect transmission errors. Furthermore, since the `CA` segment acknowledges the reception of the `CR` segment, the `CR` segment can be protected using a retransmission timer.
Unfortunately, this scheme is not sufficient to ensure the reliability of the transport service. Consider for example a short-lived transport connection where a single, but important transfer (e.g. money transfer from a bank account) is sent. Such a short-lived connection starts with a `CR` segment acknowledged by a `CA` segment, then the data segment is sent, acknowledged and the connection terminates. Unfortunately, as the network layer service is unreliable, delays combined to retransmissions may lead to the situation depicted in the figure below, where a delayed `CR` and data segments from a former connection are accepted by the receiving entity as valid segments, and the corresponding data is delivered to the user. Duplicating SDUs is not acceptable, and the transport protocol must solve this problem.
To avoid these duplicates, transport protocols require the network layer to bound the `Maximum Segment Lifetime (MSL)`. The organization of the network must guarantee that no segment remains in the network for longer than `MSL` seconds. For example, on today's Internet, `MSL` is expected to be 2 minutes. To avoid duplicate transport connections, transport protocol entities must be able to safely distinguish between a duplicate `CR` segment and a new `CR` segment, without forcing each transport entity to remember all the transport connections that it has established in the past.
A classical solution to avoid remembering the previous transport connections to detect duplicates is to use a clock inside each transport entity. This `transport clock` has the following characteristics :
the `transport clock` is implemented as a `k` bits counter and its clock cycle is such that :math:`2^k \times cycle >> MSL`. Furthermore, the `transport clock` counter is incremented every clock cycle and after each connection establishment. This clock is illustrated in the figure below.
the `transport clock` must continue to be incremented even if the transport entity stops or reboots
Transport clock
It should be noted that `transport clocks` do not need and usually are not synchronized to the real-time clock. Precisely synchronizing real-time clocks is an interesting problem, but it is outside the scope of this document. See [Mills2006]_ for a detailed discussion on synchronizing the real-time clock.
This `transport clock` can now be combined with an exchange of three segments, called the `three way handshake`, to detect duplicates. This `three way handshake` occurs as follows :

Loading…

User avatar None

String updated in the repository

cnp3-ebook / principles/transport — English

Compared to the connectionless network layer service, the transport layer service allows several applications running on a host to exchange SDUs with several other applications running on remote hosts. Let us consider two hosts, e.g. a client and a server. The network layer service allows the client to send information to the server, but if an application running on the client wants to contact a particular application running on the server, then an additional addressing mechanism is required. The network layer address identifies a host, but it is not sufficient to differentiate the applications running on a host. `Port numbers` provides this additional addressing. When a server application is launched on a host, it registers a `port number`. This `port number` will be used by the clients to contact the server process.
Compared to the connectionless network layer service, the transport layer service allows several applications running on a host to exchange SDUs with several other applications running on remote hosts. Let us consider two hosts, e.g. a client and a server. The network layer service allows the client to send information to the server, but if an application running on the client wants to contact a particular application running on the server, then an additional addressing mechanism is required. The network layer address identifies a host, but it is not sufficient to differentiate the applications running on a host. `Port numbers` provides this additional addressing. When a server application is launched on a host, it registers a `port number`. This `port number` will be used by the clients to contact the server process.
2 years ago
Browse all component changes

Glossary

English English
No related strings found in the glossary.

String information

Flags
read-only
Source string location
../../principles/transport.rst:613
String age
2 years ago
Source string age
2 years ago
Translation file
locale/pot/principles/transport.pot, string 102