Zen

Translation

``RSA``. This key exchange algorithm uses the encryption capabilities of the RSA public-key algorithm. The client has validated the server's public key thanks to the ``Certificate`` message. It then generates a (48 bytes) random number, encrypts it with the server public key and sends the encrypted number to the server in the ``ClientKeyExchange`` message. The server uses its private key to decrypt the random number. At this point, the client and the server share the same (48 bytes long) secret and use it to derive the secret keys required to encrypt and authenticate data in the second phase. With this key exchange algorithm, the server does not need to send a ``ServerKeyExchange`` message.
0/6990 · 699

Sign in to save translations.

English French Actions
In a nutshell, the client starts the TLS handshake by proposing a random nonce. The server replies with its random nonce and a certificate that binds its name to a public key. The client generates a MasterSecret that will be used later to derive the session keys and encrypts it with the public key of the server. It also generates a `Finished` message that contains a MAC of all the messages exchanged to allow the server to detect any modification of the messages sent by the client. The server also sends its own `Finished` message. At that point, the client and the server sent encrypted records thanks to the keys derived from the MasterSecret.
 
Let us first discuss the negotiation of the cryptographic algorithms and parameters. Like all security protocols, TLS includes some agility in its design since new cryptographic algorithms appear over the years and some older algorithms become deprecated once cryptanalysts find flaws. The TLS handshakes starts with the ``ClientHello`` message that is sent by the client. This message carries the following information :
 
`Protocol version number`: this is the version of the TLS protocol supported by the client. The server should use the same version of the TLS protocol as the client, but may opt for an older version. Both versions 1.2 and 1.3 of TLS are deployed today. Older versions are being deprecated.
 
`Random number`: security protocols rely on random numbers. The client sends a 32 bytes long random number where usually four of these bytes correspond to the client's clock. This random number is used, together with the server's random number, as a seed to generate the security keys.
 
`Cipher suites` : this ordered list contains the set of cryptographic algorithms that are supported by the client, with the most preferred one listed first. In contrast with ``ssh`` that allows negotiating independent algorithms for encryption, key exchange and authentication, TLS relies on suites that combine these algorithms together. Many cryptographic suites have been defined for TLS. Various recommendations have been published on the security of some of these suites :rfc:`7525`.
 
`Compression algorithm` : the client may propose the utilization of a specific compression algorithm (e.g. zlib). In theory, compressing the data before encrypting it is an intelligent way to reduce the amount of data exchanged. Unfortunately, its implementation in TLS has caused several security problems [PHG2013]_. For this reason, compression is usually disabled in TLS :rfc:`7525`.
 
`Extensions` : TLS supports various extensions in the ``ClientHello`` message. These extensions :rfc:`6066` are important to allow the protocol to evolve, but many of them go beyond the scope of this chapter.
 
The ``Server Name Indication (SNI)``
 
The ``Server Name Indication (SNI)`` extension defined in :rfc:`6066` is an important TLS extension for web servers. It is used by the client to indicate the name of the server that it wishes to contact. The IP address associated to this name has been queried from the DNS and used to establish the TCP connection. Why should the client indicate the server name in the TLS ``ClientHello`` ? The motivation is the same as for the ``Host`` header line in HTTP/1.0. With the SNI extension, a single TLS server can support several web sites that use different domain names. Thanks to the SNI extension, the server knows the concerned domain name at the start of the TLS session. Without this extension, hosting providers would have been forced use one IP address per TLS-enabled server.
 
The server replies to the ``ClientHello`` with several messages:
 
the ``ServerHello`` message that contains the protocol version chosen by the server (assumed to be the same as the client version in this chapter), the 32 random bytes chosen by the server, the `Cipher Suite` selected by the server from the list advertised by the client and a `Session Id`. This `Session Id` is an identifier which is chosen by the server. It identifies the TLS session and the security parameters (algorithms and keys) negotiated for this session. It is used to support session resumption.
 
the ``Certificate`` message provides the certificate (or usually a chain of certificates) that binds a domain name to the public key used by the server. TLS uses the server certificates to authenticate the server. It relies on a Public Key Infrastructure that is composed of a set of root certification authorities that issue certificates to certification authorities that in the end issue certificates to servers. TLS clients are usually configured with the public keys of several root certification authorities and use this information to validate the certificates that they receive from servers. For historical reasons, the TLS certificates are encoded in ASN.1 format. The details of the ASN.1 syntax [Dubuisson2000]_ are outside the scope of this book.
 
the ``ServerKeyExchange`` message is used by the server to transmit the information that is required to perform the key exchange. The content of this message is function of the selected key exchange algorithm.
 
the ``ServerHelloDone`` indicates that the server has sent all the messages for the first phase of the handshake.
 
At this point, it is time to describe the TLS key exchange. TLS supports different key exchange mechanisms that can be negotiated as part of the selection of the cipher suite. We focus on two of them to highlight their differences:
 
``RSA``. This key exchange algorithm uses the encryption capabilities of the RSA public-key algorithm. The client has validated the server's public key thanks to the ``Certificate`` message. It then generates a (48 bytes) random number, encrypts it with the server public key and sends the encrypted number to the server in the ``ClientKeyExchange`` message. The server uses its private key to decrypt the random number. At this point, the client and the server share the same (48 bytes long) secret and use it to derive the secret keys required to encrypt and authenticate data in the second phase. With this key exchange algorithm, the server does not need to send a ``ServerKeyExchange`` message.
 
``DHE_RSA``. This key exchange algorithm is the Ephemeral Diffie Hellman key exchange with RSA signatures to authenticate the key exchange. It operates as a classical authenticated Diffie Hellman key exchange. If this key exchange has been selected by the server, it sends its Diffie Hellman parameters in the ``ServerKeyExchange`` message and signs them with its private key. The client then continues the key exchange and sends the results of its own computation in the ``ClientKeyExchange`` message. ``DHE_RSA`` is thus an authenticated Diffie Hellman key exchange where the initial message is sent by the server (instead of the client as in our first example but since the protocol is symmetric, this does not matter).
 
An important difference between ``DHE_RSA`` and ``RSA`` is their reaction against attacks. ``DHE_RSA`` is considered by many to be stronger than ``RSA`` because it supports `Perfect Forward Secrecy`. This property is important against attackers that are able to eavesdrop all the (encrypted) data sent and received by a server. Consider that Terrence is such an attacker that has stored all the packets exchanged by Bob's server during the last six months. If he manages, by any means, to obtain Bob's private key, he will be able to decrypt all the keys used to secure the TLS sessions with Bob's server during this period. With ``DHE_RSA``, a similar attack is less devastating. If Terrence knows Bob's private key, he will be able to launch a man-in-the-middle attack against future TLS sessions with Bob's server. However, he will not be able to recover the keys used for all the past sessions that he captured.
 
Perfect Forward Secrecy
 
Perfect Forward Secrecy (PFS) is an important property for key exchange protocols. A protocol provides PFS if its design guarantees that the keys used for former sessions will not be compromised even if the private key of the server is compromised. This is a very important property. ``DHE_RSA`` provides Perfect Forward Secrecy, but the ``RSA`` key exchange does not provide this property. In practice, ``DHE_RSA`` is costly from a computational viewpoint. Recent implementations of TLS thus prefer ``ECDHE_RSA`` or ``ECDHE_ECDSA`` when Perfect Forward Secrecy is required.
 
All the information required for the key exchange has now been transmitted. There are two important messages that will be sent by the client and the server to conclude the handshake and start the data transfer phase.
 
The client sends the ``ChangeCipherSpec`` message followed by the ``Finished`` message. The ``ChangeCipherSpec`` message indicates that the client has received all the information required to generate the security keys for this TLS session. This messages can also appear later in the session to indicate a change in the encryption algorithms that are used, but this usage is outside the scope of this book. The ``Finished`` message is more important. It confirms to the server that the TLS handshake has been performed correctly and that no attacker has been able to modify the data sent by the client or the server. This is the first message that is encrypted with the selected security keys. It contains a hash of all the messages that were exchanged during the handshake.
 
The server also sends a ``ChangeCipherSpec`` message followed by a ``Finished`` message.
 
TLS Cipher suites
 
A TLS cipher suite is usually represented as an ASCII string that starts with TLS and contains the acronym of the key exchange algorithm, the encryption scheme with the key size and its mode of operation and the authentication algorithm. For example, ``TLS_DHE_RSA_WITH_AES_128_GCM_SHA256`` is a TLS cipher suite that uses the ``DHE_RSA`` key exchange algorithm with 128 bits AES in GCM mode for encryption and SHA-256 for authentication. The official list of TLS cipher suites is maintained by IANA [#fianaTLS]_. The NULL acronym indicates that no algorithm has been specified. For example, ``TLS_ECDH_RSA_WITH_NULL_SHA`` is a cipher suite that does not use any encryption but still uses the ``ECDH_RSA`` key exchange and ``SHA`` for authentication.
 
The TLS record protocol
 
The handshake is now finished. The client and the server will exchange authenticated and encrypted records. TLS defines different formats for the records depending on the cryptographic algorithms that have been negotiated for the session. A detailed discussion of these different types of records is outside the scope of this introduction. For illustration, we briefly describe one record format.
 
As other security protocols, TLS uses different keys to encrypt and authenticate records. These keys are derived from the MasterSecret that is either randomly generated by the client after the ``RSA`` key exchange or derived from the Diffie Hellman parameters after the ``DH_RSA`` key exchange. The exact algorithm used to derive the keys is defined in :rfc:`5246`.
 
A TLS record is always composed of four different fields :
 
a `Type` that indicates the type of record. The most frequent type is `application data` which corresponds to a record containing encrypted data. The other types are `handshake`, `change_cipher_spec` and `alert`.
 
a `Protocol Version` field that indicates the version of the TLS protocol used. This version is composed of two sub fields : a major and a minor version number.
 

Loading…

User avatar None

Source string added
``RSA``. This key exchange algorithm uses the encryption capabilities of the RSA public-key algorithm. The client has validated the server's public key thanks to the ``Certificate`` message. It then generates a (48 bytes) random number, encrypts it with the server public key and sends the encrypted number to the server in the ``ClientKeyExchange`` message. The server uses its private key to decrypt the random number. At this point, the client and the server share the same (48 bytes long) secret and use it to derive the secret keys required to encrypt and authenticate data in the second phase. With this key exchange algorithm, the server does not need to send a ``ServerKeyExchange`` message.
4 years ago
Browse all string changes

Glossary

English French
No related strings found in the glossary.

32198 String information

Source string location
../../protocols/tls.rst:225
String age
4 years ago
Last updated
a month ago
Source string age
4 years ago
Translation file
locale/fr/LC_MESSAGES/protocols/tls.po, string 48