Exit Zen
90
../../principles/reliability.rst:310
English
the interactions between the user and the datalink layer entity are represented by using the classical `DATA.req` and the `DATA.ind` primitives
0/1430 · 143
90
../../principles/sharing.rst:418
English
Frame transmission on a shared bus
0/340 · 34
91
../../glossary.rst:36 • ../../glossary.rst:271
English
ISO
0/100 · 3
91
../../principles/network.rst:369 • ../../principles/network.rst:410 • ../../principles/network.rst:420 • ../../principles/network.rst:430 • ../../principles/network.rst:440
English
label
0/100 · 5
91
../../principles/reliability.rst:311
English
the interactions between the datalink layer entity and the framing sub-layer are represented by using `send` instead of `DATA.req` and `recvd` instead of `DATA.ind`
0/1640 · 164
91
../../principles/sharing.rst:420
English
Now that we have looked at how a frame is actually transmitted as an electrical signal on a shared bus, it is interesting to look in more detail at what happens when two hosts transmit a frame at almost the same time. This is illustrated in the figure below, where hosts A and B start their transmission at the same time (point `(1)`). At this time, if host C senses the channel, it will consider it to be free. This will not last a long time and at point `(2)` the electrical signals from both host A and host B reach host C. The combined electrical signal (shown graphically as the superposition of the two curves in the figure) cannot be decoded by host C. Host C detects a collision, as it receives a signal that it cannot decode. Since host C cannot decode the frames, it cannot determine which hosts are sending the colliding frames. Note that host A (and host B) will detect the collision after host C (point `(3)` in the figure below).
0/9430 · 943
92
../../glossary.rst:38
English
The International Standardization Organization is an agency of the United Nations that is based in Geneva and develop standards on various topics. Within ISO, country representatives vote to approve or reject standards. Most of the work on the development of ISO standards is done in expert working groups. Additional information about ISO may be obtained from https://www.iso.org
0/3800 · 380
92
../../principles/network.rst:371 • ../../principles/network.rst:412 • ../../principles/network.rst:414 • ../../principles/network.rst:422 • ../../principles/network.rst:432 • ../../principles/network.rst:442
English
0
0/100 · 1
92
../../principles/sharing.rst:427
English
Frame collision on a shared bus
0/310 · 31
93
../../principles/network.rst:371
English
South
0/100 · 5
93
../../principles/sharing.rst:433
English
As shown above, hosts detect collisions when they receive an electrical signal that they cannot decode. In a wired network, a host is able to detect such a collision both while it is listening (e.g. like host C in the figure above) and also while it is sending its own frame. When a host transmits a frame, it can compare the electrical signal that it transmits with the electrical signal that it senses on the wire. At points `(1)` and `(2)` in the figure above, host A senses only its own signal. At point `(3)`, it senses an electrical signal that differs from its own signal and can thus detects the collision. At this point, its frame is corrupted and it can stop its transmission. The ability to detect collisions while transmitting is the starting point for the `Carrier Sense Multiple Access with Collision Detection (CSMA/CD)` Medium Access Control algorithm, which is used in Ethernet networks [Metcalfe1976]_ [IEEE802.3]_ . When an Ethernet host detects a collision while it is transmitting, it immediately stops its transmission. Compared with pure CSMA, CSMA/CD is an important improvement since when collisions occur, they only last until colliding hosts have detected it and stopped their transmission. In practice, when a host detects a collision, it sends a special jamming signal on the cable to ensure that all hosts have detected the collision.
0/13640 · 1364
94
../../glossary.rst:289
English
ISO-3166
0/100 · 8
94
../../principles/network.rst:371
English
7
0/100 · 1
94
../../principles/reliability.rst:334
English
To solve this problem, a reliable protocol must include a feedback mechanism that allows the receiver to inform the sender that it has processed a frame and that another one can be sent. This feedback is required even though there are no transmission errors. To include such a feedback, our reliable protocol must process two types of frames :
0/3430 · 343
94
../../principles/sharing.rst:436
English
To better understand these collisions, it is useful to analyze what would be the worst collision on a shared bus network. Let us consider a wire with two hosts attached at both ends, as shown in the figure below. Host A starts to transmit its frame and its electrical signal is propagated on the cable. Its propagation time depends on the physical length of the cable and the speed of the electrical signal. Let us use :math:`\tau` to represent this propagation delay in seconds. Slightly less than :math:`\tau` seconds after the beginning of the transmission of A's frame, B decides to start transmitting its own frame. After :math:`\epsilon` seconds, B senses A's frame, detects the collision and stops transmitting. The beginning of B's frame travels on the cable until it reaches host A. Host A can thus detect the collision at time :math:`\tau-\epsilon+\tau \approx 2\times\tau`. An important point to note is that a collision can only occur during the first :math:`2\times\tau` seconds of its transmission. If a collision did not occur during this period, it cannot occur afterwards since the transmission channel is busy after :math:`\tau` seconds and CSMA/CD hosts sense the transmission channel before transmitting their frame.
0/12360 · 1236
94
../../principles/transport.rst:536
English
To deal with these issues, the transport layer includes several mechanisms that depend on the service that it provides. It interacts with both the applications and the underlying network layer.
0/1930 · 193
95
../../glossary.rst:291
English
An :term:`ISO` standard that defines codes to represent countries and their subdivisions. See http://www.iso.org/iso/country_codes.htm
0/1340 · 134
95
../../principles/network.rst:373 • ../../principles/network.rst:412 • ../../principles/network.rst:414 • ../../principles/network.rst:424 • ../../principles/network.rst:434 • ../../principles/network.rst:444
English
1
0/100 · 1
95
../../principles/reliability.rst:336
English
data frames carrying a SDU
0/260 · 26
95
../../principles/sharing.rst:443
English
The worst collision on a shared bus
0/350 · 35