Exit Zen
42
../../protocols/tcp.rst:129
English
At this point, the TCP connection is open and both the client and the server are allowed to send TCP segments containing data. This is illustrated in the figure below.
0/1670 · 167
43
../../protocols/tcp.rst:135
English
Establishment of a TCP connection
0/330 · 33
44
../../protocols/tcp.rst:137
English
In the figure above, the connection is considered to be established by the client once it has received the `SYN+ACK` segment, while the server considers the connection to be established upon reception of the `ACK` segment. The first data segment sent by the client (server) has its `sequence number` set to `x+1` (resp. `y+1`).
0/3270 · 327
45
../../protocols/tcp.rst:141
English
Computing TCP's initial sequence number
0/390 · 39
46
../../protocols/tcp.rst:143
English
In the original TCP specification :rfc:`793`, each TCP entity maintained a clock to compute the initial sequence number (:term:`ISN`) placed in the `SYN` and `SYN+ACK` segments. This made the ISN predictable and caused a security issue. The typical security problem was the following. Consider a server that trusts a host based on its IP address and allows the system administrator to log in from this host without giving a password [#frlogin]_. Consider now an attacker who knows this particular configuration and is able to send IP packets having the client's address as source. He can send fake TCP segments to the server, but does not receive the server's answers. If he can predict the `ISN` that is chosen by the server, he can send a fake `SYN` segment and shortly after the fake `ACK` segment confirming the reception of the `SYN+ACK` segment sent by the server. Once the TCP connection is open, he can use it to send any command to the server. To counter this attack, current TCP implementations add randomness to the `ISN`. One of the solutions, proposed in :rfc:`1948` is to compute the `ISN` as ::
0/11090 · 1109
47
../../protocols/tcp.rst:147
English
where `M` is the current value of the TCP clock and `H` is a cryptographic hash function. `localhost` and `remotehost` (resp. `localport` and `remoteport` ) are the IP addresses (port numbers) of the local and remote host and `secret` is a random number only known by the server. This method allows the server to use different ISNs for different clients at the same time. `Measurements <http://lcamtuf.coredump.cx/newtcp/>`_ performed with the first implementations of this technique showed that it was difficult to implement it correctly, but today's TCP implementation now generate good ISNs.
0/5940 · 594
48
../../protocols/tcp.rst:151
English
A server could, of course, refuse to open a TCP connection upon reception of a `SYN` segment. This refusal may be due to various reasons. There may be no server process that is listening on the destination port of the `SYN` segment. The server could always refuse connection establishments from this particular client (e.g. due to security reasons) or the server may not have enough resources to accept a new TCP connection at that time. In this case, the server would reply with a TCP segment having its `RST` flag set and containing the `sequence number` of the received `SYN` segment incremented by one as its `acknowledgment number`. This is illustrated in the figure below. We discuss the other usages of the TCP `RST` flag later (see :ref:`TCPRelease`).
0/7590 · 759
49
../../protocols/tcp.rst:157
English
TCP connection establishment rejected by peer
0/450 · 45
50
../../protocols/tcp.rst:159
English
TCP connection establishment can be described as the four state Finite State Machine shown below. In this FSM, `!X` (resp. `?Y`) indicates the transmission of segment `X` (resp. reception of segment `Y`) during the corresponding transition. `Init` is the initial state.
0/2690 · 269
51
../../protocols/tcp.rst:177
English
A client host starts in the `Init` state. It then sends a `SYN` segment and enters the `SYN Sent` state where it waits for a `SYN+ACK` segment. Then, it replies with an `ACK` segment and enters the `Established` state where data can be exchanged. On the other hand, a server host starts in the `Init` state. When a server process starts to listen to a destination port, the underlying TCP entity creates a TCP control block and a queue to process incoming `SYN` segments. Upon reception of a `SYN` segment, the server's TCP entity replies with a `SYN+ACK` and enters the `SYN RCVD` state. It remains in this state until it receives an `ACK` segment that acknowledges its `SYN+ACK` segment, with this it then enters the `Established` state.
0/7390 · 739
52
../../protocols/tcp.rst:179
English
Apart from these two paths in the TCP connection establishment FSM, there is a third path that corresponds to the case when both the client and the server send a `SYN` segment to open a TCP connection [#ftcpboth]_. In this case, the client and the server send a `SYN` segment and enter the `SYN Sent` state. Upon reception of the `SYN` segment sent by the other host, they reply by sending a `SYN+ACK` segment and enter the `SYN RCVD` state. The `SYN+ACK` that arrives from the other host allows it to transition to the `Established` state. The figure below illustrates such a simultaneous establishment of a TCP connection.
0/6240 · 624
53
../../protocols/tcp.rst:185
English
Simultaneous establishment of a TCP connection
0/460 · 46
54
../../protocols/tcp.rst:None
English
Denial of Service attacks
0/250 · 25
55
../../protocols/tcp.rst:192
English
When a TCP entity opens a TCP connection, it creates a Transmission Control Block (:term:`TCB`). The TCB contains the entire state that is maintained by the TCP entity for each TCP connection. During connection establishment, the TCB contains the local IP address, the remote IP address, the local port number, the remote port number, the current local sequence number and the last sequence number received from the remote entity. Until the mid 1990s, TCP implementations had a limit on the number of TCP connections that could be in the `SYN RCVD` state at a given time. Many implementations set this limit to about 100 TCBs. This limit was considered sufficient even for heavily load http servers given the small delay between the reception of a `SYN` segment and the reception of the `ACK` segment that terminates the establishment of the TCP connection. When the limit of 100 TCBs in the `SYN Rcvd` state is reached, the TCP entity discards all received TCP `SYN` segments that do not correspond to an existing TCB.
0/10190 · 1019
56
../../protocols/tcp.rst:194
English
This limit of 100 TCBs in the `SYN Rcvd` state was chosen to protect the TCP entity from the risk of overloading its memory with too many TCBs in the `SYN Rcvd` state. However, it was also the reason for a new type of Denial of Service (DoS) attack :rfc:`4987`. A DoS attack is defined as an attack where an attacker can render a resource unavailable in the network. For example, an attacker may cause a DoS attack on a 2 Mbps link used by a company by sending more than 2 Mbps of packets through this link. In this case, the DoS attack was more subtle. As a TCP entity discards all received `SYN` segments as soon as it has 100 TCBs in the `SYN Rcvd` state, an attacker simply had to send a few 100 `SYN` segments every second to a server and never reply to the received `SYN+ACK` segments. To avoid being caught, attackers were of course sending these `SYN` segments with a different address than their own IP address [#fspoofing]_. On most TCP implementations, once a TCB entered the `SYN Rcvd` state, it remained in this state for several seconds, waiting for a retransmission of the initial `SYN` segment. This attack was later called a `SYN flood` attack and the servers of the ISP named panix were among the first to `be affected <http://memex.org/meme2-12.html>`_ by this attack.
0/12870 · 1287
57
../../protocols/tcp.rst:200
English
To avoid the `SYN flood` attacks, recent TCP implementations no longer enter the `SYN Rcvd` state upon reception of a `SYN segment`. Instead, they reply directly with a `SYN+ACK` segment and wait until the reception of a valid `ACK`. This implementation trick is only possible if the TCP implementation is able to verify that the received `ACK` segment acknowledges the `SYN+ACK` segment sent earlier without storing the initial sequence number of this `SYN+ACK` segment in a TCB. The solution to solve this problem, which is known as `SYN cookies <http://cr.yp.to/syncookies.html>`_ is to compute the 32 bits of the `ISN` as follows :
0/6350 · 635
58
../../protocols/tcp.rst:202
English
the high order bits contain the low order bits of a counter that is incremented slowly
0/860 · 86
59
../../protocols/tcp.rst:203
English
the low order bits contain a hash value computed over the local and remote IP addresses and ports and a random secret only known to the server
0/1420 · 142
60
../../protocols/tcp.rst:205
English
The advantage of the `SYN cookies`_ is that by using them, the server does not need to create a :term:`TCB` upon reception of the `SYN` segment and can still check the returned `ACK` segment by recomputing the `SYN cookie`. The main disadvantage is that they are not fully compatible with the TCP options. This is why they are not enabled by default on a typical system.
0/3700 · 370
61
../../protocols/tcp.rst:None
English
Retransmitting the first `SYN` segment
0/380 · 38