Exit Zen
10
../../protocols/udp.rst:51
English
The UDP header contains four fields :
0/370 · 37
11
../../protocols/udp.rst:53
English
a 16 bits source port
0/210 · 21
12
../../protocols/udp.rst:54
English
a 16 bits destination port
0/260 · 26
13
../../protocols/udp.rst:55
English
a 16 bits length field
0/220 · 22
14
../../protocols/udp.rst:56
English
a 16 bits checksum
0/180 · 18
15
../../protocols/udp.rst:58
English
As the port numbers are encoded as a 16 bits field, there can be up to only 65535 different server processes that are bound to a different UDP port at the same time on a given server. In practice, this limit is never reached. However, it is worth noticing that most implementations divide the range of allowed UDP port numbers into three different ranges :
0/3560 · 356
16
../../protocols/udp.rst:60
English
the privileged port numbers (1 < port < 1024 )
0/460 · 46
17
../../protocols/udp.rst:61
English
the ephemeral port numbers ( officially [#fephemeral]_ 49152 <= port <= 65535 )
0/790 · 79
18
../../protocols/udp.rst:62
English
the registered port numbers (officially 1024 <= port < 49152)
0/610 · 61
19
../../protocols/udp.rst:64
English
In most Unix variants, only processes having system administrator privileges can be bound to port numbers smaller than `1024`. Well-known servers such as :term:`DNS`, :term:`NTP` or :term:`RPC` use privileged port numbers. When a client needs to use UDP, it usually does not require a specific port number. In this case, the UDP implementation will allocate the first available port number in the ephemeral range. The range of registered port numbers should be used by servers. In theory, developers of network servers should register their port number officially through IANA [#fportnum]_, but few developers do this.
0/6180 · 618
20
../../protocols/udp.rst:69
English
Computation of the UDP checksum
0/310 · 31
21
../../protocols/udp.rst:71
English
The checksum of the UDP segment is computed over :
0/500 · 50
22
../../protocols/udp.rst:73
English
a pseudo header :rfc:`2460` containing the source address, the destination address, the packet length encoded as a 32 bits number and a 32 bits bit field containing the three most significant bytes set to 0 and the low order byte set to 17
0/2390 · 239
23
../../protocols/udp.rst:74
English
the entire UDP segment, including its header
0/440 · 44
24
../../protocols/udp.rst:83
English
Several types of applications rely on UDP. As a rule of thumb, UDP is used for applications where delay must be minimized or losses can be recovered by the application itself. A first class of the UDP-based applications are applications where the client sends a short request and expects a quick and short answer. The :term:`DNS` is an example of a UDP application that is often used in the wide area. However, in local area networks, many distributed systems rely on Remote Procedure Call (:term:`RPC`) that is often used on top of UDP. In Unix environments, the Network File System (:term:`NFS`) is built on top of RPC and runs frequently on top of UDP. A second class of UDP-based applications are the interactive computer games that need to frequently exchange small messages, such as the player's location or their recent actions. Many of these games use UDP to minimize the delay and can recover from losses. A third class of applications are multimedia applications such as interactive Voice over IP or interactive Video over IP. These interactive applications expect a delay shorter than about 200 milliseconds between the sender and the receiver and can recover from losses directly inside the application.
0/12150 · 1215
25
../../protocols/udp.rst:89
English
Footnotes
0/100 · 9
26
../../protocols/udp.rst:90
English
This limitation is due to the fact that the network layer cannot transport packets that are larger than 64 KBytes. As UDP does not include any segmentation/reassembly mechanism, it cannot split a SDU before sending it. The UDP header consumes 8 bytes and the IPv6 header 60. With IPv4, the IPv4 header only consumes 20 bytes and thus the maximum UDP payload size is 65507 bytes.
0/3780 · 378
27
../../protocols/udp.rst:92
English
A discussion of the ephemeral port ranges used by different TCP/UDP implementations may be found in http://www.ncftp.com/ncftpd/doc/misc/ephemeral_ports.html
0/1570 · 157
28
../../protocols/udp.rst:94
English
The complete list of allocated port numbers is maintained by IANA_ . It may be downloaded from http://www.iana.org/assignments/port-numbers
0/1390 · 139
The translation has come to an end.