Source string Source string

1095/10000 · 1095
English Actions
Any solution which is used to compute the forwarding tables of a network must ensure that all destinations are reachable from any source. This implies that it must guarantee the absence of black holes and forwarding loops.
The `forwarding tables` and the precise format of the packets that are exchanged inside the network are part of the `data plane` of the network. This `data plane` contains all the protocols and algorithms that are used by hosts and routers to create and process the packets that contain user data. On high-end routers, the data plane is often implemented in hardware for performance reasons.
Besides the `data plane`, a network is also characterized by its `control plane`. The control plane includes all the protocols and algorithms (often distributed) that compute the forwarding tables that are installed on all routers inside the network. While there is only one possible `data plane` for a given networking technology, different networks using the same technology may use different control planes.
The simplest `control plane` for a network is to manually compute the forwarding tables of all routers inside the network. This simple control plane is sufficient when the network is (very) small, usually up to a few routers.
In most networks, manual forwarding tables are not a solution for two reasons. First, most networks are too large to enable a manual computation of the forwarding tables. Second, with manually computed forwarding tables, it is very difficult to deal with link and router failures. Networks need to operate 24h a day, 365 days per year. Many events can affect the routers and links that compose a network. Link failures are regular events in deployed networks. Links can fail for various reasons, including electromagnetic interference, fiber cuts, hardware or software problems on the terminating routers,... Some links also need to be either added to or removed from the network because their utilization is too low or their cost is too high.
Similarly, routers also fail. There are two types of failures that affect routers. A router may stop forwarding packets due to hardware or software problems (e.g., due to a crash of its operating system). A router may also need to be halted from time to time (e.g., to upgrade its operating system or to install new interface cards). These planned and unplanned events affect the set of links and routers that can be used to forward packets in the network. Still, most network users expect that their network will continue to correctly forward packets despite all these events. With manually computed forwarding tables, it is usually impossible to pre-compute the forwarding tables while taking into account all possible failure scenarios.
An alternative to manually computed forwarding tables is to use a network management platform that tracks the network status and can push new forwarding tables on the routers when it detects any modification to the network topology. This solution gives some flexibility to the network managers in computing the paths inside their network. However, this solution only works if the network management platform is always capable of reaching all routers even when the network topology changes. This may require a dedicated network that allows the management platform to push information on the forwarding tables. Openflow is a modern example of such solutions [MAB2008]_. In a nutshell, Openflow is a protocol that enables a network controller to install specific entries in the forwarding tables of remote routers and much more.
Another interesting point that is worth being discussed is when the forwarding tables are computed. A widely used solution is to compute the entries of the forwarding tables for all destinations on all routers. This ensures that each router has a valid route towards each destination. These entries can be updated when an event occurs and the network topology changes. A drawback of this approach is that the forwarding tables can become large in large networks since each router must always maintain one entry for each destination inside its forwarding table.
Some networks use the arrival of packets as the trigger to compute the corresponding entries in the forwarding tables. Several technologies have been built upon this principle. When a packet arrives, the router consults its forwarding table to find a path towards the destination. If the destination is present in the forwarding table, the packet is forwarded. Otherwise, the router needs to find a way to forward the packet and update its forwarding table.
Computing forwarding tables
Networks deployed several techniques to update the forwarding tables upon the arrival of a packet. In this section, we briefly present the principles that underlie three of these techniques.
The first technique assumes that the underlying network topology is a tree. A tree is the simplest network to be considered when forwarding packets. The main advantage of using a tree is that there is only one path between any pair of nodes inside the network. Since a tree does not contain any cycle, it is impossible to have forwarding loops in a tree-shaped network.
In a tree-shaped network, it is relatively simple for each node to automatically compute its forwarding table by inspecting the packets that it receives. For this, each node uses the source and destination addresses present inside each packet. Thanks to the source address, a node can learn the location of the different sources inside the network. Each source has a unique address. When a node receives a packet over a given interface, it learns that the source (address) of this packet is reachable via this interface. The node maintains a data structure that maps each known source address to an incoming interface. This data structure is often called the `port-address table` since it indicates the interface (or port) to reach a given address.
Learning the location of the sources is not sufficient, nodes also need to forward packets towards their destination. When a node receives a packet whose destination address is already present inside its port-address table, it simply forwards the packet on the interface listed in the port-address table. In this case, the packet will follow the port-address table entries in the downstream nodes and will reach the destination. If the destination address is not included in the port-address table, the node simply forwards the packet on all its interfaces, except the interface from which the packet was received. Forwarding a packet over all interfaces is usually called `broadcasting` in the terminology of computer networks. Sending the packet over all interfaces except one is a costly operation since the packet is sent over links that do not reach the destination. Given the tree-shape of the network, the packet will explore all downstream branches of the tree and will finally reach its destination. In practice, the `broadcasting` operation does not occur too often and its performance impact remains limited.
To understand the operation of the port-address table, let us consider the example network shown in the figure below. This network contains three hosts: `A`, `B` and `C` and five routers, `R1` to `R5`. When the network boots, all the forwarding tables of the nodes are empty.
Host `A` sends a packet towards `B`. When receiving this packet, `R1` learns that `A` is reachable via its `West` interface. Since it does not have an entry for destination `B` in its port-address table, it forwards the packet to both `R2` and `R3`. When `R2` receives the packet, it updates its own forwarding table and forward the packet to `C`. Since `C` is not the intended recipient, it simply discards the received packet. Router `R3` also receives the packet. It learns that `A` is reachable via its `North-West` interface and broadcasts the packet to `R4` and `R5`. `R5` also updates its forwarding table and finally forwards it to destination `B`. Let us now consider what happens when `B` sends a reply to `A`. `R5` first learns that `B` is attached to its `North-East` port. It then consults its port-address table and finds that `A` is reachable via its `North-West` interface. The packet is then forwarded hop-by-hop to `A` without any broadcasting. Later on, if `C` sends a packet to `B`, this packet will reach `R1` that contains a valid forwarding entry in its forwarding table.
By inspecting the source and destination addresses of packets, network nodes can automatically derive their forwarding tables. As we will discuss later, this technique is used in :term:`Ethernet` networks. Despite being widely used, it has two important drawbacks. First, packets sent to unknown destinations are broadcasted in the network even if the destination is not attached to the network. Consider the transmission of ten packets destined to `Z` in the network above. When a node receives a packet towards this destination, it can only broadcast that packet. Since `Z` is not attached to the network, no node will ever receive a packet whose source is `Z` to update its forwarding table. The second and more important problem is that few networks have a tree-shaped topology. It is interesting to analyze what happens when a port-address table is used in a network that contains a cycle. Consider the simple network shown below with a single host.
Assume that the network has started and all port-address and forwarding tables are empty. Host `A` sends a packet towards `B`. Upon reception of this packet, `R1` updates its port-address table. Since `B` is not present in the port-address table, the packet is broadcasted. Both `R2` and `R3` receive a copy of the packet sent by `A`. They both update their port-address table. Unfortunately, they also both broadcast the received packet. `B` receives a first copy of the packet, but `R3` and `R2` receive it again. `R3` will then broadcast this copy of the packet to `B` and `R1` while `R2` will broadcast its copy to `R1`. Although `B` has already received two copies of the packet, it is still inside the network and continues to loop. Due to the presence of the cycle, a single packet towards an unknown destination generates many copies of this packet that loop and will eventually saturate the network. Network operators who are using port-address tables to automatically compute the forwarding tables also use distributed algorithms to ensure that the network topology is always a tree.
Another technique called `source routing` can be used to automatically compute forwarding tables. It has been used in interconnecting Token Ring networks and in some wireless networks. Intuitively, `source routing` enables a destination to automatically discover the paths from a given source towards itself. This technique requires nodes to encode information inside some packets. For simplicity, let us assume that the `data plane` supports two types of packets :
the `data packets`
the `control packets`
`Data packets` are used to exchange data while `control packets` are used to discover the paths between hosts. With `source routing`, routers can be kept as simple as possible and all the complexity is placed on the hosts. This is in contrast with the previous technique where the nodes had to maintain a port-address and a forwarding table while the hosts simply sent and received packets. Each node is configured with one unique address and there is one identifier per outgoing link. For simplicity and to avoid cluttering the figures with those identifiers, we assume that each node uses as link identifiers north, west, south,... In practice, a node would associate one integer to each outgoing link.
In the network above, router `R2` is attached to two outgoing links. `R2` is connected to both `R1` and `R3`. `R2` can easily determine that it is connected to these two nodes by exchanging packets with them or observing the packets that it receives over each interface. Assume for example that when a node (either host or router) starts, it sends a special control packet over each of its interfaces to advertise its own address to its neighbors. When a node receives such a packet, it automatically replies with its own address. This exchange can also be used to verify whether a neighbor, either router or host, is still alive. With `source routing`, the data plane packets include a list of identifiers. This list is called a `source route`. It indicates the path to be followed by the packet as a sequence of link identifiers. When a node receives such a `data plane` packet, it first checks whether the packet's destination is a direct neighbor. In this case, the packet is forwarded to this neighbor. Otherwise, the node extracts the next address from the list and forwards it to the neighbor. This allows the source to specify the explicit path to be followed for each packet. For example, in the figure above there are two possible paths between `A` and `B`. To use the path via `R2`, `A` would send a packet that contains `R1,R2,R3` as source route. To avoid going via `R2`, `A` would place `R1,R3` as the source route in its transmitted packet. If `A` knows the complete network topology and all link identifiers, it can easily compute the source route towards each destination. It can even use different paths, e.g. for redundancy, to reach a given destination. However, in a real network hosts do not usually have a map of the entire network topology.
In networks that rely on source routing, hosts use control packets to automatically discover the best path(s). In addition to the source and destination addresses, `control packets` contain a list that records the intermediate nodes. This list is often called the `record route` because it allows recording the route followed by a given packet. When a node receives such a `control packet`, it first checks whether its address is included in the record route. If yes, the packet has already been forwarded by this node and it is silently discarded. Otherwise, it adds its own address to the `record route` and forwards the packet to all its interfaces, except the interface over which the packet has been received. Thanks to this, the `control packet` can explore all paths between a source and a given destination.
For example, consider again the network topology above. `A` sends a control packet towards `B`. The initial `record route` is empty. When `R1` receives the packet, it adds its own address to the `record route` and forwards a copy to `R2` and another to `R3`. `R2` receives the packet, adds itself to the `record route` and forwards it to `R3`. `R3` receives two copies of the packet. The first contains the `[R1,R2]` `record route` and the second `[R1]`. In the end, `B` will receive two control packets containing `[R1,R2,R3,R4]` and `[R1,R3,R4]` as `record routes`. `B` can keep these two paths or select the best one and discard the second. A popular heuristic is to select the `record route` of the first received packet as being the best one since this likely corresponds to the shortest delay path.
With the received `record route`, `B` can send a `data packet` to `A`. For this, it simply reverses the chosen `record route`. However, we still need to communicate the chosen path to `A`. This can be done by putting the `record route` inside a control packet which is sent back to `A` over the reverse path. An alternative is to simply send a `data packet` back to `A`. This packet will travel back to `A`. To allow `A` to inspect the entire path followed by the `data packet`, its `source route` must contain all intermediate routers when it is received by `A`. This can be achieved by encoding the `source route` using a data structure that contains an index and the ordered list of node addresses. The index always points to the next address in the `source route`. It is initialized at `0` when a packet is created and incremented by each intermediate node.
The third technique to compute forwarding tables is to rely on a control plane using a distributed algorithm. Routers exchange control messages to discover the network topology and build their forwarding table based on them. We dedicate a more detailed description of such distributed algorithms later in this section.
Flat or hierarchical addresses
The last, but important, point to discuss about the `data plane` of the networks that rely on the datagram mode is their addressing scheme. In the examples above, we have used letters to represent the addresses of the hosts and network nodes. In practice, all addresses are encoded as a bit string. Most network technologies use a fixed size bit string to represent source and destination address. These addresses can be organized in two different ways.
The first organization, which is the one that we have implicitly assumed until now, is the `flat addressing` scheme. Under this scheme, each host and network node has a unique address. The unicity of the addresses is important for the operation of the network. If two hosts have the same address, it can become difficult for the network to forward packets towards this destination. `Flat addresses` are typically used in situations where network nodes and hosts need to be able to communicate immediately with unique addresses. These `flat addresses` are often embedded inside the network interface cards. The network card manufacturer creates one unique address for each interface and this address is stored in the read-only memory of the interface. An advantage of this addressing scheme is that it easily supports unstructured and mobile networks. When a host moves, it can attach to another network and remain confident that its address is unique and enables it to communicate inside the new network.
With `flat addressing` the lookup operation in the forwarding table can be implemented as an exact match. The `forwarding table` contains the (sorted) list of all known destination addresses. When a packet arrives, a network node only needs to check whether this address is included in the forwarding table or not. In software, this is an `O(log(n))` operation if the list is sorted. In hardware, Content Addressable Memories can efficiently perform this lookup operation, but their size is usually limited.

Loading…

User avatar None

String updated in the repository

cnp3-ebook / principles/network — English

Host `A` sends a packet towards `B`. When receiving this packet, `R1` learns that `A` is reachable via its `West` interface. Since it does not have an entry for destination `B` in its port-address table, it forwards the packet to both `R2` and `R3`. When `R2` receives the packet, it updates its own forwarding table and forward the packet to `C`. Since `C` is not the intended recipient, it simply discards the received packet. Router `R3` also receives the packet. It learns that `A` is reachable via its `North-West` interface and broadcasts the packet to `R4` and `R5`. `R5` also updates its forwarding table and finally forwards it to destination `B`. Let us now consider what happens when `B` sends a reply to `A`. `R5` first learns that `B` is attached to its `North-East` port. It then consults its port-address table and finds that `A` is reachable via its `North-West` interface. The packet is then forwarded hop-by-hop to `A` without any broadcasting. Later on, if `C` sends a packet to `B`, this packet will reach `R1` that contains a valid forwarding entry in its forwarding table.
Host `A` sends a packet towards `B`. When receiving this packet, `R1` learns that `A` is reachable via its `West` interface. Since it does not have an entry for destination `B` in its port-address table, it forwards the packet to both `R2` and `R3`. When `R2` receives the packet, it updates its own forwarding table and forward the packet to `C`. Since `C` is not the intended recipient, it simply discards the received packet. Router `R3` also receives the packet. It learns that `A` is reachable via its `North-West` interface and broadcasts the packet to `R4` and `R5`. `R5` also updates its forwarding table and finally forwards it to destination `B`. Let us now consider what happens when `B` sends a reply to `A`. `R5` first learns that `B` is attached to its `North-East` port. It then consults its port-address table and finds that `A` is reachable via its `North-West` interface. The packet is then forwarded hop-by-hop to `A` without any broadcasting. Later on, if `C` sends a packet to `B`, this packet will reach `R1` that contains a valid forwarding entry in its forwarding table.
2 years ago
Browse all component changes

Glossary

English English
No related strings found in the glossary.

String information

Flags
read-only
Source string location
../../principles/network.rst:269
String age
2 years ago
Source string age
2 years ago
Translation file
locale/pot/principles/network.pot, string 44