Zen

Translation

The parity bit allows a receiver to detect transmission errors that have affected a single bit among the transmitted `N+r` bits. If there are two or more bits in error, the receiver may not necessarily be able to detect the transmission error. More powerful error detection schemes have been defined. The Cyclical Redundancy Checks (CRC) are widely used in datalink layer protocols. An N-bits CRC can detect all transmission errors affecting a burst of less than N bits in the transmitted frame and all transmission errors that affect an odd number of bits. Additional details about CRCs may be found in [Williams1993]_.
0/6200 · 620

Sign in to save translations.

English Czech Actions
To understand `error detection codes`, let us consider two devices that exchange bit strings containing `N` bits. To allow the receiver to detect a transmission error, the sender converts each string of `N` bits into a string of `N+r` bits. Usually, the `r` redundant bits are added at the beginning or the end of the transmitted bit string, but some techniques interleave redundant bits with the original bits. An `error detection code` can be defined as a function that computes the `r` redundant bits corresponding to each string of `N` bits. The simplest error detection code is the parity bit. There are two types of parity schemes : even and odd parity. With the `even` (resp. `odd`) parity scheme, the redundant bit is chosen so that an even (resp. odd) number of bits are set to `1` in the transmitted bit string of `N+r` bits. The receiver can easily recompute the parity of each received bit string and discard the strings with an invalid parity. The parity scheme is often used when 7-bit characters are exchanged. In this case, the eighth bit is often a parity bit. The table below shows the parity bits that are computed for bit strings containing three bits.
 
3 bits string
 
Odd parity
 
Even parity
 
000
 
1
 
0
 
001
 
010
 
100
 
111
 
110
 
101
 
011
 
The parity bit allows a receiver to detect transmission errors that have affected a single bit among the transmitted `N+r` bits. If there are two or more bits in error, the receiver may not necessarily be able to detect the transmission error. More powerful error detection schemes have been defined. The Cyclical Redundancy Checks (CRC) are widely used in datalink layer protocols. An N-bits CRC can detect all transmission errors affecting a burst of less than N bits in the transmitted frame and all transmission errors that affect an odd number of bits. Additional details about CRCs may be found in [Williams1993]_.
 
It is also possible to design a code that allows the receiver to correct transmission errors. The simplest `error correction code` is the triple modular redundancy (TMR). To transmit a bit set to `1` (resp. `0`), the sender transmits `111` (resp. `000`). When there are no transmission errors, the receiver can decode `111` as `1`. If transmission errors have affected a single bit, the receiver performs majority voting as shown in the table below. This scheme allows the receiver to correct all transmission errors that affect a single bit.
 
Received bits
 
Decoded bit
 
Other more powerful error correction codes have been proposed and are used in some applications. The `Hamming Code <https://en.wikipedia.org/wiki/Hamming_code>`_ is a clever combination of parity bits that provides error detection and correction capabilities.
 
Reliable protocols use error detection schemes, but none of the widely used reliable protocols rely on error correction schemes. To detect errors, a frame is usually divided into two parts :
 
a `header` that contains the fields used by the reliable protocol to ensure reliable delivery. The header contains a checksum or Cyclical Redundancy Check (CRC) [Williams1993]_ that is used to detect transmission errors
 
a `payload` that contains the user data
 
Some headers also include a `length` field, which indicates the total length of the frame or the length of the payload.
 
The simplest error detection scheme is the checksum. A checksum is basically an arithmetic sum of all the bytes that a frame is composed of. There are different types of checksums. For example, an eight bit checksum can be computed as the arithmetic sum of all the bytes of (both the header and trailer of) the frame. The checksum is computed by the sender before sending the frame and the receiver verifies the checksum upon frame reception. The receiver discards frames received with an invalid checksum. Checksums can be easily implemented in software, but their error detection capabilities are limited. Cyclical Redundancy Checks (CRC) have better error detection capabilities [SGP98]_, but require more CPU when implemented in software.
 
To solve this problem, datalink protocols associate a `sequence number` to each data frame. This `sequence number` is one of the fields found in the header of data frames. We use the notation `D(x,...)` to indicate a data frame whose sequence number field is set to value `x`. The acknowledgments also contain a sequence number indicating the data frames that it is acknowledging. We use `OKx` to indicate an acknowledgment frame that confirms the reception of `D(x,...)`. The sequence number is encoded as a bit string of fixed length. The simplest reliable protocol is the Alternating Bit Protocol (ABP).
 

Loading…

User avatar None

Source string added
The parity bit allows a receiver to detect transmission errors that have affected a single bit among the transmitted `N+r` bits. If there are two or more bits in error, the receiver may not necessarily be able to detect the transmission error. More powerful error detection schemes have been defined. The Cyclical Redundancy Checks (CRC) are widely used in datalink layer protocols. An N-bits CRC can detect all transmission errors affecting a burst of less than N bits in the transmitted frame and all transmission errors that affect an odd number of bits. Additional details about CRCs may be found in [Williams1993]_.
6 years ago
Browse all string changes

Glossary

English Czech
No related strings found in the glossary.

17973 String information

Source string location
../../principles/reliability.rst:441
String age
6 years ago
Last updated
2 months ago
Source string age
6 years ago
Translation file
locale/cs/LC_MESSAGES/principles/reliability.po, string 139